-
Posts
1227 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by KenC210
-
-
If you don't have a roller you could use the back end of a screw driver to apply some pressure to the deadener. That's what i used, a craftsman screw driver has a round end on the back an worked fine
edit: http://toolmonger.com/wp-content/uploads/2007/12/DM_Sear5screwdrivers.jpg
-
-
Alright so after the holidays from visiting family and great things. It was about time for me to continue with my build. Well i was going to start with the sub box with previous specs, however when i want to double check my measurements to see if they will fit. Well it comes to the fact i only have 40.5 max width and that is an extremely tight fit. So i decided to get in torres and try a new box. Well this is what i came up with. What do you guys think of the specs? Does everything seem ok before i start the box?
-
happy new years to all...
The liquor is to be poured first by the way... enjoy the jack
-
Yes, you can if the amp allows you to run it bandpass (not familar with the AQ), but if it is, then this tool can.
At about 7:50 in my video I show how to do it only I was using a sundown 100.4.
Thank you that is a good video... Seems like i will be getting on the cc-1 sometime next month
-
Bump... Just wondering before i buy a tool that will not work with how i am trying to use it.
-
So i have an AQ120.4 and would like to set crossover points in specific ranges. Would i be able to do it with this tool?
What i plan on is setting ranges for Mid bass, mid range, and tweeters. I have looked at the manual for the cc-1 but i dont think there was anything about setting cross over points for band pass.
-
A few clips you gotta check out. Just let them hate though.
Katt Williams-haters Pimp Chronicles
v This here in reply to the hate v
edit: Also got to admit i didn't know much about car audio till i was introduced to this site. Only messed with car audio in high school and a buddy at work old me about the guy steve meade and to look him up on you tube i got inspired.
-
lol.. are you talking about the charge lead???
Thought this was funny also...
But anyway I think there is less resistance from a larger wire so you can get more charge faster.
-
this couldn't have com at a better time... Im looking at getting some video equipment in my ride.
-
Here is the new torres... I kinda like it better how does it look?
-
Thank you for the support...
Just curious about dropping the box size a half cube, what are the benefits or disadvantages of doing so? You say due to the power im running, 2 AQ2200D strapped, that it would be a good idea just wondering why.
-
i dont know much about those subs so i can say for sure if the volume is good but the port look good now.
Alright thank you. The site says ideal at 3.5cuft for 1 15" ported so i figured around 7cuft should do.
-
Alright i adjusted the box a little. I tried playing around with the port and i think i got it or maybe not, what you guys think?
-
yes this is for a daily. So i should try and change the tuning and shoot for a smaller port area per cuft
edit: so the port area @118 is good or should i change things around to get 13-14in2 per ft3?
-
Oh sorry its for a pair of 15's
-
Just looking for some input on this box build. Just wondering if the box is right for these subs. I will be powering them with 2 AQ2200D's
Edit: Post #21, page 2 with new edited specs.
-
SUBS: 2 XL 15's Also 2 LVL 4 15's
78065
-
GM vehicles? looks familiar
Im sure it comes in others also but specifically from toyota
-
Its a factory sheet they put in the fully equipped vehicles
-
If i had to guess its rubberized asphalt but i am sending a few pieces to jon tomorrow and what info he gives me i will post it unless he has posted it here already
-
I have these vibration damp pieces that i get for free. I would like to send you a sample to get your input. It seems you have done your homework on a lot of the other brands and have the best educated opinions. If its not to much trouble i would like your opinion.
Some pics of the damp
-
Its about as stupid as those people who walk around the store with music playing on their phone. It's obnoxious and when people give you that look when you drive by they're not thinking "wow that guy is the shit", they're thinking "what a fucking douchebag".
It's about as pointless as a broken arrow unless you drive sitting on the hood of your car or you play music in a parade.
-
I dropped them an email i will find out either way
edit: I know i been looking around and i seem to see most pro audio is individually priced, but i was sure in this cause because i seen some as a pair also. Like the AQ pro audio is sold as pair. I was thinking about getting them but i have no idea when they will be available again
Mechman SOTM Prizes!
in MechMan Alternators and 12v Accessories
Posted · Edited by KenC210
Really... Its not the system that wins, it's the hard work that did it... Just saying
Edit: congrats to the winners... Also nice alt hunters