Diamond500
-
Posts
102 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Diamond500
-
-
Just got a new HID Kit from Sharp hid and was going good until i turned one side on and it started smoking and getting hot so hot that i burnt my hand from the actual bulb. What can be the problem maybe? Came with a battery harness that i didn't used i don't know that could be it. Also the kit is a 55 watt and installing this on a 2000 Honda Accord.
Thanks
-
-
When i do a flush can i fill it back up with 50/50 coolant all the way so i don't have to mix my own coolant with water.
-
I didn't switch anything around to check but the right side seems to be a bit better then the left.
-
They were showing signs of Hids just not bright like a solid color kind of fading a bit.
-
what color?
The Hids are 6000k with a hint of blue. If that's what you mean by color.
-
There the TYC Projectors without the Halo ring, and after looking them up before i bought them some people had a great outcome on them light out wise. Even saw a few pics and videos of them that looked really good at night.
-
Aftermarket Projectors. To me the hids fade a bit and i have to use my high beams most of the time to see.
-
-
Well i installed my Hids about a week ago and for some reason they are not bright and not close to the ones i see in pictures. Is it possible i need a bigger ballast maybe a 55watt to get a better outcome. I got the 6000k kit from this site if anyone is wondering.
Thanks
-
Did this glue hold a plastic sheet covering the door?
That glue is meant to not harden and stay soft and sticky so it holds the plastic sheet in place keeping the cold and heat out or in and stop drafts from air coming into the cabin.
Yep it was holding the Plastic sheet. I was going to take off the glue and put second skin on the door panels.
-
Well i got everything hooked up but have a new problem now. The Hid is way to high and not pointing towards the ground how do i fix that. I'm using a h1 bulb in this and it's doesn't fit in the hole unless i turn it side ways. Can anyone help me with this. I know some people have hids in these's headlights and they worked great.
-
Well i got my Projector lights in and thought it be easy to connect a HID to it but i guess not since i'm new to this. I got the bulb in but have no idea how to wire the hid wiring to the headlights. Do i connect the bottom harness to the bottom wiring of the headlights and the red and black to the red and black inside the projector? As you can see in the picture i have the 2 wires(red and black) that needs to be connect to something.
-
Thats fine for this unit but that does not work with all dvd units
Ok Thanks Man.
-
Even though it's cheap to by a relay couldn't i just ground the wire? If not then i will just buy one then.
-
I got this headunit on the way which should be here tomorrow and was wondering do i just ground the green wire and i wouldn't need to use a bypass? Since i heard this works.
http://www.pioneerelectronics.com/PUSA/Car/DVD-Receivers/AVH-P3300BT
-
Thanks for the help guys. Will finish the speakers tomorrow, already got one side of the tweeter done tonight.
-
Wires from the door going into the crossover
Wires coming out of the crossover with spade terminals on one end going to the tweeter
Wires coming out of the crossover with spade terminals on one end going to the midrange
You shouldn't have to be jamming multiple wires into 1 connector for this
Unless I am misunderstanding you lol
Got it understand that now. Thanks.
One last thing do i glue on the tweeter trim ring since it won't snap in unless i'm doing something wrong.
-
I have spade connectors put won't fit i might have to open them a bit more. Wouldn't that mean i have to put 2 wires in the connector the one coming out of the door then 1 from the crossover to the speaker.
-
No amp straight to the headunit.
Do i have to solider the wire to the speakers then?
-
Just got my Rockford Fosgate T1s in today and i'm a complete noob since this is my first time installing mids and crossovers and what not. I took out my old stocks speakers and just have this wiring left in the door. What do i do cut it off and connect it to the crossover. I'm lost on this. Any help would be great.
Thanks
-
Well i got some mids and highs on the way and today i went to take out my stock speakers and found a big mess. When i took off the door panels there was tons of glue in the inside that is still wet not even dry. This has to be over 7 years old and super sticky, is there anything good out there that can take all this off.
Thanks
-
Is there any good Chrome paints that come in a Spray Can. I know Killer Chrome does not work but is there anything similar to that but actually works.
Thanks
-
sorry could you explain what part dont fit ? maybe pics ?
This is my stock battery i had when i removed that battery and put the new one in, the Kinetik one didn't fit good like this one was to low and the terminals were under the plastic housing not above plus the rods not screwing far enough to hold it in. So i was thinking a HC-1400 would work better.
New HIDS Smoking
in Interior / Exterior / Paint - Detailing, washing, waxing,tricks of the trade!
Posted
Got this kit 6,000k 55 Watt. I had 35 watt hids on already i just upgraded them to a 55 watt and then ran into that problem.
http://www.sharphid.com/product_p/shhid.htm