FunkMcOwnage

I don't want to tune that high. The RE Calculator gave me 35hz as a tuning frequency with these same dimensions. That's why I asked which calculator was more accurate.

If I were to make a square port box, like I'm suggesting?

add strength as in brace it with mdf triangles?

I'm trying to design a box for a single SXX15D2 for my 95 Nissan Maxima. These is what I've come up with so far. The specs for the woofer are as follows: 15" Mounting Depth - 8.4 inch Mounting Hole Diameter - 14 inch Overall Diameter - 15.5 inch Bolt Hole Circle - 14.65 inch Motor Width - 7.3 inch Motor Depth - 3.6 inch Basket Depth - 4.8 inch Displacement - 0.18 cu. ft. Weight - 27.6 lbs. Would a box 16" tall be big enough for a 14" mounting hole? the overall diameter of the woofer is 15.5". The RE Box calculator gives me a totally different tuning frequency than Torres Box Calculator. I realize they're 2 different programs, but which is more accurate? Any feedback or suggestions would be appreciated

I think I'll be placing the order this weekend since I get paid on friday. Thanks for the help fellas.

I don't doubt that an infinity amp would be a better purchase. The only one that matches my needs is 90w RMS x4. Will this damage the speakers at high volume since they're rated for 75w each? EDIT: http://www.sonicelectronix.com/item_9712_Infinity-Reference-475a.html It isn't much more expensive than the Pioneer, so I wouldn't mind dropping the extra $30 on it.

I think that if i did decide to upgrade later on I would probably just sell the speakers and amp together. Would the infinities and the Pioneer be a good choice compatibility-wise though?

I'm looking to upgrade the speakers in my '95 nissan maxima. I know the front door panels take 6 3/4" speakers because I've replaced them once before. Sonic Electronics says the rear deck has 6 3/4's aswell so it looks like I'll be getting two pairs of 'something'. I like the specs of the Infinity Kappa 652.9i's. Any feedback on these speakers or any other infinity speakers would be appreciated. http://www.sonicelectronix.com/item_13454_Infinity-Kappa-652.9i.html The amp I've picked out is this: http://www.sonicelectronix.com/item_37751_Pioneer-GM-6500F.html It looks like the right amp for the job. 85w RMS @ 2ohms (the speakers are rated at 75w RMS @ 2ohms). I'm very close to placing the order! What do you guys think? I'm pretty confident this will be a pretty badass mids/highs setup for my first install. The bass will come later Any feedback or suggestions on this setup would be appreciated.

Anyone aware of any single-din head-units that can play .FLAC files using a USB stick?

It's off the album Ruthless if you want to find it. I'd like to see someone try a demo of this