-
Posts
763 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by zx10intn
-
-
only accept western union and t/t, so it must be totally legit
-
i wonder who has theyre actual iphone 5 prototype. someone stole it a week or 2 ago
It wasn't stolen it was lost by an employee, then they tried tracking it via gps to no avail
lol or so he says
Well why wouldn't he just say stolen if it was stolen?? Seems like less flack to catch that way. And if he did lie knowingly, the sfpd might not think too highly of that after they got involved
-
i wonder who has theyre actual iphone 5 prototype. someone stole it a week or 2 ago
It wasn't stolen it was lost by an employee, then they tried tracking it via gps to no avail
-
For a sneak peek at the real form factor of the new iPhone check out this.... http://m.bgr.com/2011/09/15/iphone-5-to-have-radical-new-design-according-to-case-mate-images/
-
if you are under powering them and blowing them, then you are over clipping them
-
I am bringing my van. I do believe we also bringing our Black Truck and Pinky. You should be able to get so good demoes
cool. and i just put two and two together and figured out who you were by your avatar! im the guy who gave mike in the white eclipse the fuse holder out of my truck for his run
-
anyone planning on going to the white house event this sunday the 18th? i plan on bringing out the chevelle and would love to get some demos while im there!
-
yes, its fine if you wire the sub to your amp at 1 ohm, it just wont put out the power it does at .5, but you wont be jeopardizing your equipment, its fine
-
apparently my request was deleted for a reason unknown to me... there is no state rep listed for my state or dealer in my area so ill ask again... price of 7.5k ad 9k in 37073
-
much improved, looks great did you wind up wrapping them in invo's?
-
selenium 8s are good beyma 8s are good i would get those if i had room for 8 midbass drivers
but your sig says you already have room? 2 reference 8" drivers? lol
-
the first port wall should be 12" deep, then turn and your second piece should be 2.5", when measured down the center there will be 6" of length in the bend
Thanks! and also, is the12volt.com a good website to calculate the port length? Cuz i've seem mixed results between a sloted port and sqaure port. :/
i prefer torres calculator, its free and more accurate. look for it under the subwoofer/enclosure section i think
-
the first port wall should be 12" deep, then turn and your second piece should be 2.5", when measured down the center there will be 6" of length in the bend
-
you stop at the width of the port, then measure down the middle. for instance, if your part was 6" wide, stop 6" from the rear wall and make your turn. subtract the width of your port from the overall length for your port wall. say it was 6 wide and you make one turn and needed it to be 30", you would have 24" of port wall. hope that make sense lol
-
i had already looked through the rulebook and didnt find it, but upon being told it was there, of course i found it haha. thanks bro
-
anyone have a basic outline on a good/cheap way to make a meca stand i can test on at home. does everyone basically just make a base with a 26" stand and velcro the termlab on?
-
6 3/4" tweeter, lmao
-
My alt charges my kinetiks at 15.2, no issues
-
What most people fail to realize is taxing the rich doesn't effect them like you would think, they just pass it down in price hikes or lower wages and makeup for it off the backs of working people
-
whichever you want the voltage to read from.... i run mine to the rear battery where my amp pulls from but i think its mostly preference
-
where are the batteries?
-
Explicit "tip drill" video > all
-
why would you want to run an alt on an underdrive pulley? turning it slower would be the last thing i would want it to do
Well thats what I'm asking. I have the stock alt on now with no voltage drop and sparse upgrades (Big 3). I am even running a stock battery, and at full tilt, there is almost no drop. However, my system isn't very powerful at the moment but I did come across these underdrive pulleys by unorthodox racing for my accord. I'd like to get a little extra power out of her, because the K24 is quite an engine when its worked.
I just was curious about the possibility of a bigger alt on a smaller pulley.
i see what you are saying now, but you have it all wrong. an underdrive pulley will turn the alt slower, resulting in less power being made, what you are wanting is an overdrive pulley to turn it faster
-
overkill is relative lol, i would just use 3/4 and double baffle with bracing if it were me, but hey, if you want the 1" go for it, just make sure you have a back brace handy, that shit is heavy!
strange findings over in china town
in Off Topic - Random, Misc posts - the forum "Junk Drawer"
Posted
the 500 a month is what they can supply, not what you are committing to