loud
-
Posts
52 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by loud
-
-
-
well since trying to get the the 6 inch aeroport to work will be retarded. so i am just going to do a slot port. could someone help me make a box for a slot port box.
-
is this any better
i could always make the box deeper but i dont want the box to big.
-
what would happen if i only had that distance away from the wall.
-
how far away should it be from the back of the box. all you told me yesterday was 6 inches, and i thought you were talking about the distance from the side wall.
its generally X inches from any wall, so i've heard
ohh ok. well that helps alot
-
how far away should it be from the back of the box. all you told me yesterday was 6 inches, and i thought you were talking about the distance from the side wall.
-
what size port do you recommend
-
im waiting on my xl 15(comes august 3) and i would like to know what you guys think of the box. if i need to change anything or suggestions. sub will be running off a aq2200 and will be in a 2006 Pontiac grand prix. and will be sealed off
*yes i know the sketch of the box doesn't have a x2 baffle.
-
this is my first system( in my first car) and i am new to setting gains and such. i was wondering how do i know how far i can turn my bass nob after i set my gains?\
and i was reading the SMD Distortion Detector DD-1 manual and i did not see anything about bass nob
-
how many people live in Illinois, because i dont know any car audio people that do...
-
what is a term lab score for like 2 alpine type r's on 1000w? ive always wondered how loud those types of subs are.( the average subs). and i cant find any vids of it.
-
does that mean all the subs are done...
-
i cant wait to get mine. i ordered late tho (july 17th)
-
is this ok to do.
-
what are the songs in this song??
-
I would use 16 or 18 awg wire for it. You arent drawing much current with it so there is no need to have 0 gauge going to your volt meter. Hell if you wanted to, you could use some remote hookup wire for your positive and negative wires but one thing with this is MAKE SURE YOU KNOW WHICH ONE IS POSITIVE AND NEGATIVE. Dont want to take the risk of reversing the polarity on it.
If you wanted to do it a cheap way just head to advance automotive or any other car store and get some hookup wire. Its like $7-8 for a 40 foot roll. Heres a link to what im talking about.. http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Primary-Wire-18-Ga--40%22-Black-Card-Autocraft_5013747-P_N4022B_A%7CGRP2020A_____
They put it near the fuses and i used that when i had to make an accessory turn on for my radio since my envoy doesnt have an accessory wire to turn the radio on and off with the ignition.
ok thanks, ill just put tape at the ends so i know the difference. And when i wire it, do i just put the 18 awg and the 0awg into the power terminals on the amp. for both neg and pos?
-
i have a stinger volt meter and i need wire to run it to the amp(taking voltage at amp not battery)
i need more wire so i can wire it there
What wire should i use?
-
Using Aero for port i take it?
yep
-
well what i do now, i put 1 wire from each terminal to the side of the box (usually bolts) and wire it externally into parallel or series, so if you want to change it, you dont have to pull the sub out.
same thing as said above^^^
i do know you can wire out side of box. but this will be only run in parallel(i can only fit on sub in location...no wall yet) and if i was going to add another i would make new bot and then could change where i wire them.
-
????????????
-
2006 Pontiac grand prix
-
i am wondering if i wire my subs in parallel at the sub will the two 8 gauge wires be able to fit in the terminals??
-
so while im waiting on my xl 15, i am trying to decide on what to do with the box.(size and tuning)
What size should my box be and what frequency should it be tunned to?(being loud and having the LOWS)
*willbe run with an aq2200.
-
how much voltage drop should i be expecting on a d2400 up front powering a saz2500d or an aq2200d? thanks
*oh and on a 125amp alt.
SMD Distortion Detector DD-1
in SMD Distortion Detector (DD-1) Topics
Posted
its the audioque knob idk which one that is