Jump to content

pwdrblucivic

Members
 View Profile  See their activity

  • Posts

    187

  • Joined

  • Last visited

 Content Type 

Posts posted by pwdrblucivic

  6. SA-15 Box Help..

    in Subwoofers / Enclosures

    Posted · Edited by pwdrblucivic

    18"h x 37"w x 34"d..........Port on bottom.....3.75"h x 35.5"w x 30"d........34 hz..........7.2 cubes........

    Try the above measurements...........below is an enclosure with that type of port I done a while back...

    0512121519.jpg0511122047.jpg

  7. Really Confused

    in Subwoofers / Enclosures

    Posted · Edited by pwdrblucivic

    Sounds like there is something seriously wrong with the design and tuning of your box.......Those 18s ought to be all over that 15".............Of course the types of vehicles you guys have plays a huge role as well...........If his 15" is in a CRX....lol......and your 18s are in a Suburban or Expedition that's not exactly a level playing field......get us some dimensions on your enclosure/port.............

  17. table saw

    in TOOLS and TESTING Devices

    Posted

    10" is just the blade size. You have to consider the CUTTING WIDTH of the saw...Some 10" saws cut boards up to 30" wide but most of them don't. I think mine goes up to 26" wide on the right side of blade. I usually make my larger cuts with my circular saw and then use the table saw for the smaller box cuts.

  22. What if there is NO distortion?......I have a question?

    in SMD Distortion Detector (DD-1) Topics

    Posted

    Ok.....thanks guys........maybe it was a grounding issue but like I said it was hooked up to the amp when we done the test on the deck and the light came on right about 25......I will have him bring car by and try it again......I know the DD-1 is good cause it works fine in the demo car........I used track #1 to setup deck and track #7 to setup amp which is the one the manual says use for a louder system...This is the exact same way I set up my amps....I'll just have to try it on his again next time he is around.......

  23. What if there is NO distortion?......I have a question?

    in SMD Distortion Detector (DD-1) Topics

    Posted

    I have used my new DD-1 on several amps since its arrival Saturday but I have a question....The distortion light NEVER came on with the last amp I tried to setup with it.. I done the head unit test first and it distorted at 25 so we set the deck to 24 and started adjusting amp.....I was able to turn the bass boost and gain all the way up....The distortion light never came on.....I tried it several times with same result.....I even took the DD-1 back over to my demo car and tested it again and the light worked like it should......Could it be possible for an amp to go FULL TILT without distortion?

×
×
  • Create New...