kfx400kid

ok thanks............

Cool so with the sq3000 it should be super loud to.....

As of rite now, i have only 2 american bass xfl 15's. But i plan on going with four and a 500.1. I have the vfl150.1 rite now with the two and had four mids for my front stage and it couldn't keep up with just the 150.1. i had two 6.5's one in each door and two 5" one in each pillar. The sound amp was the sq945 4 channel, i had id bridged to each side. But like most i want to hear my sounds just as much as the bass, no more no less.......

Does anybody have any experience with the american bass sq8b? I plan on putting four of them in each front door with four of the sq6.5-cb and running the sq3000 amp, one amp to each front door. I also have two of the sq5-cb in each of my a-pillars and going to use the sq-05t tweeter in the door's. The tweeter's and the 5's will be on the sq900 amp.

Could you explain the diffrence between the # of common port walls, i'm 2 trying to build a box subs up and port in the middle of the box facing the rear. do i use #2common walls or #3common walls if the port has a L on the end of it.. thanks

well i'm trying to build a box for two american bass xfl 15's and i have the torres box calculator. i want to know about the port options. the box will be 20.5hx24.5dx38w to come out to 9.2 gross. i want the subs to fire up and the port on the back facing the hatch. for the port i have come up with a 5" opening 19" tall and depth i think is 29.5 to be at 33.13hz. now for woofer disp i put in .5 and for bracing i added .3 as i want to put angles in the corners. with all that the net vol is 6.21ft3 witch is good but for the port do i have to add how many common port walls to or do i leave that part blank. remeber i want the port in the middle of the box facing back towards the hatch. if i put the # of common walls the freq changes to a lower one and i have to shorting the port to 26" and the net vol goes up to 6.37ft3 witch is still good. now should i put in the # of common walls to 3 as it will be in the middle of the box and will have to have a L at the end of it, if so then i have to make port even shorter to 25.5 for 33.13hz and disp goes up to 6.47ft3. with the last option the physical prot length will be 19.75". now will that be the length that i need to cut the board or will it still have the L on the end of it... thakns