-
Posts
2079 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by SMZ2
-
-
Nah I didn't blow them I bought them from a pawn shop and they wete rigged to work haha. Never buying from a pawn shop again. But maybe not really low then and I set my amps right it just needs a bigger box its in a tiny prefab box
-
I have a crappy 10 inch pioneer I think its 200-300 watt rms but I wanna build a ported box for it tuned really low my other subs blew so its all I got until I get my new system.
-
If I removed the motor I could use a 15" basket and a 15 inch recone since there isn't one for a 12
-
Okay well I'm going to talk to him then I'm going to start cutting. When I get down to the motor and the basket how would I remove the motor? I took apart my old polk 12 and when I tried removing the screws attached to the motor they striped.
-
Is there anyway if I'm really careful cutting I can reuse the softparts after fixing the pole piece or is there anyway to take off the magnet without removing the softparts?
-
Its a 12
-
My friend gave me his sub to look at and see if its fixable its a rf p2 its and 8 ohm svc model. Anyway he dropped it one day and it quit working. I pushed down on it and its rubbing really bad it hardly moves unless you push down hard. I think its coil rub can thia be fixed if not it will have to be trashed I don't think there are recones for it.
-
Pricing shipped to 27809
-
Any other blown 18s
-
I'm looking for a blown 18 such as a hdc3, fi bl, fi btl, or anything else I'm open to anything thank you.
-
how much for just the aq motors and baskets?
-
Ill probably go with 35hz then. Because I listen to everything rap, classic rock, punk, reggae, beats, etc, and stuff that doesn't have a category haha. but I'd like to give the occasional demo also.
-
@mlstrass why is that what I listen to alittle bit of everything including c&s music
-
I need help designing a box for an AQ HDC3 18 with copper coils. I drive an 2002 nissan xterra. I have no idea how to design a box really but I can build it. I just need help with the design. I also want it to be tuned to 32hz. Thank you.
-
Level 4 18 and level 4 18 with Level 5 upgrade
Xl 18 and direct leads on the subs
175.4 amp
27809
-
I'm about to buy the lumber to build the box but one question what would I use for the bracing?
-
Yeah thanks man. Sorry it just helps a whole lot more especially since this is my first time building a box haha.
-
I'm sorry I'm just more of a visual person
-
Like the dimensions on the drawing? I don't see any maybe its because I'm on my phone...
-
Wow that's a good drawing! I'm not trying to be a pain but could you add in the measurements please?
-
Thanks for the input guys I'm really excited to see your drawing. Thanks again
-
Can anybody draw up something anything would help. Thank you
-
Thanks can I get some more input anybody? If I get measurements and a design I can build it myself it will be the first box I've built but I'm excited! Any help is appreciated.
-
I need help designing a enclosure for a dc level 4 18 it will be in a 2002 xterra
width:41"
height:20"
length:24"
that is what I have to work with I'm looking for somewhere around 6cu ft and 32hz for tuning. I could really use some help.
Thank you.
box for my crappy sub haha
in Subwoofers / Enclosures
Posted
I use a multimeter.