-
Posts
492 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Aaron Tuck TBA
-
-
-
Test shows 1 ohm 3250n 2 ohm 2356 total of 5606. As long as I did it right
- 1
-
-
1 ohm
1810
2 ohm
1550
The winning number is! 3360!
I have confidence it will do quite well. Good luck everyone and Thanks a lot steve for another fun contest!
-
I believe in over kill my self. if you can afford it i would go biggest you can in order to give yourself head room for any future upgrades.
-
Thanks guys!
-
The $250 unit? What are the cheaper ones? That's what's confusing me.
-
I'm looking into a vcm. But what one is required for my car? 2000 cavalier 2.2l ohv mechman 270 amp ad244 4 pin oval plug. Some help please!
-
Dual Sensor Term Lab
Aaron Tuck
Cody, Wyoming 82414
-
NOV 2011 with this profile. Cody WY.
But been lurking for a few years prior. watching Steve Meades YouTube since 06ish.
-
I know the amp can push more than 900 into 2 ohm load. That's just where I have it set.
-
It's DMM I purchased at O'Reilly Auto. I figured my electrical should be ok for the amp turned down. I ran my old zx750.1 with a birth sheet rated at 930 wrms in to 2 ohms without the xs power batteries.
-
If it is an issue with the amp I want to test and make sure it's not a fault somewhere else. If it is the amp. Any one you could recommend on repairing?
-
I have Diyma oversized 0 gauge wire throughout. All grounds have been ground down to bare metal for both the big 3 and the amp/rear battery. Like I stated in the first post I have a XS D925 under the hood and a XS D2400 in the trunk. Stock alternator for now looking into a new one. I have a ground from front to rear batt and a ground to the rear strut bolt that I have sanded bare. Everything is tight. I'll monitor voltage at the amp tomorrow.
-
not yet haven't had time to get it installed
-
i used 2 ohm for equation making it roughly 900 watts. im in process of selling my 12's and not looking to push them too hard. No the amp is not hot at all when it goes into protect.
-
oops my bad. I set them with my DMM set at 42 ACV with 50hz tone.
-
Hey fellas i recently bought this amp and when i hook it up it turns on and works great...until i turn it up for roughly 3-5 minutets on a heavy bassed song it goes into protect. The gain is only roughly 1/4-1/3 up. No bass boost from deck or amp. I'm running Stinger HPM 3 rca's to the amp and have the ran down passanger side of vehicle with my power wires are on the driver side. I have performed my Big 3 have 2 runs of Zero front to back(1 neg 1 pos) XS power D925 under the hood and a XS D2400 in the trunk. Currently pushing 2 DC lvl 2 12's at 2 ohm load. Any ideas what could be going on?
-
-
He's capable of anything.
So I have heard.
ill think of some thing
Awesome more ideas the better.
-
Yes exactly! I did just send him an email explaining my intentions and what im looking for tho. You never know what someone can do unless you ask, right?
-
I did think of Tech Force just wasn't sure about go to them for this because I'm Not lookin for a decal this time but a design for Business Cards, Banners, Signs ect.
-
Looking for some extremely talented people that could come up with a Logo Design for me.
Would like it to have my business name in it (Tucks Custom Installs) maybe a Sub-woofer and coiled wire or an amp.
I came up with this about a year and a half ago
Lookin for something new tho starting Fresh and just got my business license so time for a new face so to speak.
Thanks for your time fellas!!!
-
The box looks like it would work but I'm not sure on the cubic feet needed or the subs. I'll have to look at the specs of the subs
I looked up specs for 2 12"CVR's and with the room you got this is as close as i can get.
VCM question.
in XS Power Batteries / Chargers! (and other stuff too)
Posted
I was suggested to not bump my voltage because I'm buying a lithium battery soon.