-
Posts
492 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Aaron Tuck TBA
-
-
awesome thank you I think i got a grasp on it now just to play around with it.
-
Your distances should be 23 1/2, 5 3/4 = 28 1/4.
you mean 29.25?
-
New calc
adjusted sketch 29 1/8" port
-
Shit i added a third baffle for flush mount and two for meat the sub will grab. Forgot to add that
-
Thanks for your help Joe youve been a lot of help
-
so adding just one side is 29.25" total port?
-
so if im doing this right its a total of 35"
-
so the distance from b ottom wall and internal port is only 5" not the full 10"?
like this?
-
im still not getting how to measure physical port length in a center port that has to bend
-
ive never done a box with a center port how do i measure it out?
-
like this then?
-
awesome ill give a design a shot
-
any way of fixing?
-
-
SHould i remove the divide?
-
This one is good enough, it better idea to make sure you have free airspace in front of the both port ends about as much as it's diameter to keep your tuning.
when you say good enough, good enough for...what exactly?
thank you guys for your input everything helps
You don't really need to measure like in the second pic although is correct, but the effect on tuning would be minimal in most cases, just temperature alters your tuning more, 1 hertz of tuning difference is most likely inaudible for most people.
thank you good to know
-
Torres calc
my thoughts so far
-
But I think its 28" not 26" right?
Yes 28 my typo
-
Im going to run 2 TFS 18's
-
This one is good enough, it better idea to make sure you have free airspace in front of the both port ends about as much as it's diameter to keep your tuning.
when you say good enough, good enough for...what exactly?
thank you guys for your input everything helps
-
What are you planning on putting in it? And I agree with Joe X. I also would recommend putting some changing all the 90s to 45s. (you might already be planning on that and just don't have it in the design yet, but I thought I'd toss it in there.)
when putting 45's in like my second pic, do i need to measure like that?
-
is this right looking? port length of 26"
-
a cheap route i took for an alt was a gm 1 wire 200 amp fir good for me on my 95 accord 2.2l SOHC batt light stays on but i just never fixed that part
-
im designing my own box and it has a bend in it do i measure it like this dotted line? for actual port length?
thanks for any help
Will this work? Please help
in Subwoofers / Enclosures
Posted
Ive got a thought!?! Some might not agree but an idea i had.
internal view
outer view can be changed if wanted
im not the experienced at box designing but i try and you got to start somewhere right?
hope this helps