Jump to content

SlamminBeats

Members
  • Posts

    3974
  • Joined

  • Last visited

Posts posted by SlamminBeats

  1. I have vids of 2 RE SXX 15s, on only a t1500cp. you might not be so quick to put down RE.

    and if you heard anything else you may not be so quick to praise them.

    Are they complete trash? not compelte but i definitely wouldnt spend 800 bucks on a xxxs.

    believe me ive heard plenty. RE SXX's are good plain and simple. Trying to not to be a fan boy, but i did my research prior to buying these, and you get what you pay for (usually), and in this case it was worth it.

  2. so then 56 is safer then? right?

    62 is clip free... so volume 0-62 is safe

    you want the most amount off preout voltage so you turn the gain on amp up the least, this results in the least amount of thd

    i see i see, but the bass amp read distortion at 57, everything was flat, my question is, you know the sub level how it goes from -24 to +6, i had it at 0. that to me seems to be almost all the way up... should it have been at 0 or at like -24??

    how is that possible? with gain all the way down play track 1+2 thru amp speaker terminals til headunit clips, which will be volume 62. then go to track 3/4 or 5/6, volume at 62, don't move test probes and turn up gain til it distorts. which means the bass amp cannot distort at 57, its impossible because when you turned the gain up the headunit volume should have been 62.

    sub level should be at 0

    yea i had sub level at 0 when testing HU clipping, it went on at 57. So say i tune it at 62, would you recommend turning it up to 62?

  3. so then 56 is safer then? right?

    62 is clip free... so volume 0-62 is safe

    you want the most amount off preout voltage so you turn the gain on amp up the least, this results in the least amount of thd

    i see i see, but the bass amp read distortion at 57, everything was flat, my question is, you know the sub level how it goes from -24 to +6, i had it at 0. that to me seems to be almost all the way up... should it have been at 0 or at like -24??

×
×
  • Create New...