[DD1 + RADIO WITHOUT CD PLAYER]

I would say yes sav the tracks in a floppy disk. Make sure u select the highest quality available before u transfer them. It should be like checking clipping for ur iPod .

Hahaha Nice I need to do that.

[Blown?]

Ya the subs are blown the amp was not tuned right. The saw dust has nothing to do with it. That is just careless installers.

[MY FIRST SYSTEM!!]

That logo looks SO sick!! Nice work

[alternator help]

If your alternator is jumping 2 volts with no change is rpms sounds like a bad regulator.

[Bad luck today anyone?]

That sucks man, but why is he messing with your wires??

[The Big 3]

If your alternator is not putting enough amps then adding a 1/0awg to it is not going to do anything. Sounds like either your battery is bad or your alternator is. A stock alternator should be able to put out enough amps for that amp with out the big 3 and with no voltage drop.

[Getting DD-1 Tomorrow]

What do I do with the hpf and the lpf dials if it's on full?

If it is on full It does not matter because nothing is being filtered.

[At what db level should you disable your airbags?]

I have never heard of someone having airbags go of because of music but I guess it could happen. I would just pull the fuse if you are worried about it.

[Help me build my first sound system.]

Ya look for used stuff so you can get good stuff in your budget. Stay away from walmart and don't forget a good box

[what power for 2 lvl 4's]

Just do 2k a little more if you are burping.

[TRUCK GOT BROKE INTO!...]

Sorry to hear that man. Hope you get your stuff replaced from the insurance.

[Just got my DD-1 today!]

bumpppp

Just measure the head unit distortion through the amp it is better

[Car troubles after installing second battery and doing big 3]

When you did the big 3 did you leave the factory wires? Some cars the stock power wire from the alternator goes to the fuse block and runs the electrical and they will not work if you just put a 1/0 on and did not connect the factory wire as well. Also make sure your grounds are all good.

[Very Frustrating - Not getting signal]

Check for voltage at the rca cables you might have bad cables or the deck is not putting power out of the rca inputs because in is on a different setting.