-
Posts
1126 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by g2shuck
-
-
-
It's dual 4 so options are 2 ohms or 8 ohms and 8 ohms is useless lol
-
It's dual 4 so options are 2 ohms or 8 ohms and 8 ohms is useless lol
-
This would be my second option. http://www.caraudiogiants.com/alpine-mrx-m110.html?gclid=Cj0KEQjwopOeBRC1ndXgnuvx8JYBEiQAq4RPt_xZl_YIOSFsS9cjiS7fXNFw9SyK9l4jdhmU_yaAtz0aAp3L8P8HAQ
I would still go crescendo because you could later get a second sub and wire to 1 ohm and get around 1600 watts without needing a new amp
-
This gets my vote. Will do a little iver 1k at 2 ohms based in codys Dyno results and it's great price.
-
For a single level 3 m2 I would get a dc 1.2k and wire to 1 ohm. After impedance rise it will be perfect pair.
-
I am also wondering
-
Drivers port will meter higher and hot seat the passenger better
-
Volume and port area looks good. Drivers side port?
-
I would drop net volume to around 1.5 if your gonna overpower it
-
What did you need up figuring out?
-
Wait if your wired 0.35 nominal and it's showing 0.35 on the imsg what the issue?
-
Let me download the manual and see if I can confuse myself even more lol
-
Never used one but I also find your results interesting
-
I've said this once, twice, and i'll say it again. Damn near every single DC build i've sat in whether or not running rated power or a little more, or a lot more. They've always had a funky smell to me. Not typical burnt coil smell, maybe it has to do with the glue they use?
My level 4s always had a distinct smell to them that was not coil backed up by the fact that when I sold them the coils still looked new
-
Exactly my two xls are going on a 7.5k at 0.5 daily. You gotta know what your doing and build the box for the planned power and set gains properly.
-
Price on one for my 175.4?
-
-
You could use a Skar LP550.1D which would give it 420rms at 2 ohms or 350rms at 4 ohms depending on what coil configuration sub you bought.
It is a dvc.
Ya if it's dual 2 wire to 4 if it's dual 4 wire to 2
-
You could use a Skar LP550.1D which would give it 420rms at 2 ohms or 350rms at 4 ohms depending on what coil configuration sub you bought.
-
Looks damn good
-
But I'm going to need the post to attach the 1/0 lugs to pos and negative right?
No bolt the lug straight to the battery with the included bolts. So e people spend money on toolmaker terminals like myself but only for looks.
-
Comes with bolts but not post
-
New IX Series Subwoofer Line by Skar Audio - 200 Watts RMS 8"/10"/12" - PREORDER
in SKAR AUDIO - (READ ONLY ARCHIVE)
Posted
Also I don't see them on your site