-
Posts
1126 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by g2shuck
-
-
I would split it since each wire should be carrying half what the amps is pulling
-
-
Badass rusty
-
looks nice. Need and testers lol I have single cab we are currently using to test quad 8 center console setups in.
-
can you pm me a price on two 12s in dual 2 ohm please
-
where are you located? I have some spare amps I would like to get on the dyno
-
So will this be a true subwoofer or could it be used as a midbass in an ib door type install?
I am also wanting to know this. What is the usable range of this driver?
-
Just build a battery bank man. Il be running a dc 12.0k on dc 270 alt and 6 d3100 and a d3400
-
Doing a single cab center console build for a guy that 6 of these would be sick in on a 2k amp
-
Have any left?
-
If you are stuck at $320I would get the xp3000, But I would save $40 more and get a d3100
-
what is your dollar goal for a battery? you might be better with one of the d series batteries depending on budget.
-
I probably have roughly 12 inches more depth and 12 inches more widths to work with than a stock camry
-
Not a normal lol camry most the rear interior metal has been removed :-)
-
Any idea what realistic tuning for a level 6 is? I can't get winisd to work on my new laptop for some reason
-
If I combine the two ideas above of weight saving with two 18s and Cody suggestion of a 10k I could to two level 6 18s on a 10k and only need 12 cubes net
-
A lot if the car has already been cut out for my current trunk build is why I have so much room I forgot to mention that lol
-
I have 48 width x 40 height x 36 depth to work with which is actually 34.39 gross with 1 inch mdf if my calculations are correct. Of course I would not be using 1 inch. Is will be 1.5 inch walls and port with 3 inch baffle. Not trying to sound like an ass hope I am not that is the actual measurements I have to work with if I build it in the car.
-
Regardless too much port not enough cubic feet and tuning js way too low unless all you play is decaf
28 cubes gross is not enough in your opinion? Port area and tuning is easy to change.
Not too concerned with the actualy box design, that can always be edited. You have plenty of net airspace to work with.
With 8 12s, you are going to be looking at 12-14ft3 of total net airspace. Depending on which sub you go with and how much power you are running.
8 Level 3 12s built with the Level 4 coil and a 10k to power them would make for one very nice wall.
Shoot me a pm on the level 4 coil in the level 3 12s
-
2000 camry
-
Ok guys I am taking out the sealed trunk build and doing a wall build. On the baffle I can fit 8 12, 4 15s, or 2 18s. Depending on which sub I go with he amp will either be a 5k or a 10k. With this wall design below what subs would you go with for daily and comp use? I can change the box tuning to fit the subs without a problem.
-
This is just awesome steve.
-
-
Emf car audio man
Ford F150 Ipad Mini Float Mount Dash kit - By Soundman! Got mine! (INSTALL Pics / Video Page 2!)
in Just Meade....my projects - Tons of SMD Builds here!
Posted
Sure do with I could fit a mini in my dash and not lose my double din.