97wht3800

One hundred something, but I figure there has to be away around it. I have an amp to hook up for my mids and highs (not hooked up yet) But im not getting any power to the deck... For now I'd like to use the deck to power the speakers until I can get something better to use with the amp.. Any help would be great thanks

The deck won't turn on at all because the factory amp isnt sending power to it, I need to know if theres a wire I can use for this or if I have to buy the extra harness... Yea the amp comes on I ran some rca's off the stock sub wires to the amp... I have a stockk deck right now( I know its lame but I just moved and my deck and all my audio stuff is in storage) I reset the amp and it seems to work fine but if I change any setting it turns off again and says "service" on the digital screen...

Well I messed with the amp (kicker 1250.1 digital) it keeps saying service when it cuts out but I reset it and it seems to work but still cuts out if I try to change any of the settings... @ BBF Larry I have the wiring harness but it needs one to make the speakers work with an aftermarket deck and I have heard that you can bypass them to make the deck work but no luck so far... is there a way to find a wiring diagram for these trucks?

Only thing i didnt check was the fuse holder... Im going to check on my break here in a minute.. Anyone have advice on the deck connection?

The ground is sanded down and the proper size,, ill check the gain in a second but this setup has worked for over a year with no problems at all.. As far as the deck problem I wasnt very clear, it has the remote for the subs but on newer gmc trucks its a pita to put in a aftermarket deck.. you need a harness to connect to the new deck (not a normal wiring harness) because theres a seperate connect for the factory amp which I dont want to use...

Alright im a newb here but follow steve on youtube and have been into audio since I got a car.. First problem is with my subs... they were working fine and now if I turn them up the amp shuts off but comes back on in about 10 seconds.. I havent changed anything and did check all the wires.. maybe something loose? I dont see a reason for the amp to go into protect.. any ideas? Alright now my deck problem, I have a 2002 gmc yukon and am trying to hook up a pioneer 7 inch fold out, I know there are wire harnesses that you can connect but it seems like you could find a remote wire off the factory wire harness.. any help on this would be good... and once i figure that out how hard would it be to move the deck down to where the factory tape deck was? I dont have a problem mounting it I was more wondering about moving the wires down to that location... Thanks for any help, Dave