ALAMO695
-
Posts
83 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by ALAMO695
-
-
Looks like something is happening lol
- 1
-
Name-rich
zip 07055
1 dc xl m2 12"
-
Good enough for A 5k and 1500w in mids and highs? Hoping to hold mid 13's. Get in here cody lol. Heres the electrical equipment
270 amp alt
2 runs of 1/0 pos
2 runs of 1/0 neg
1 xs d3400 up front
3 xs xp3000 in the trunk
Dual inputs on the amp
Enough to run at half ohm right?
-
Steve,
I just received my DD1- HV. I just have 1 questions about it.
It came with what you said above is a XLR/RCA adapter. I have read through the manual and cannot find what it is for or how to use it. Can you please explain.
This is the piece.
to check for distortion in pro audio equipment, dj setups ect.
-
pm me, i have a couple parts we can talk about.
-
maybe one of the coils started going bad? since he is clipping a lot because of the gain settings?
op do you have a dmm?
-
-
-
is a 270amp alt, 300ah worth of batteries, 3 runs of pos and 3 runs of neg cca 1/0gauge enough for a dc 5k at .5 Ohm (expecting minimal rise) and a sundown sax 200.4? keeping a steady voltage of mid to low 13s while at full tilt?
alt- mechman 270amp
front batt- xs d5100
rear batts- 2 xs xp3000
wire- xs xp flex and shok reference 1/0
sub amp- dc 5k w. dual imputs on all the imputs
subs- 2 dc xl m2 12"
mids and highs- 6 sundown neo pro 8"/ 4 neo pro 10"/ kickers ssmb8s/ selenium st200
amps- sundown 200.4 & small 2 chan for the tweeters
-
Run a one inch wire or bigger hose from someplace hidden in the front of the car (behind the grill or something) and route it to have it blow on the alt somewhere. You can also get creative and add a fan to the front of the hose (part where the air is forced into) and it will improove airflow
-
just eliminate the wetcell completely and run the 0g from the back batteries to the front terminal. You will then basically start your car from the rear battery bank.
-
the agm batts usually rest higher than wetcells, therefore if you connect the agm with the wetcells, the wetcell will think that the agm is some type of charge and bring down the voltage of the agm to where they will "even out".Im pretty sure its the other way around. the amg batteries bring down the wet battery
edit causing the agm (if it rest bellow 12.6v) to develop sulfation on the cells, making that part of the cell pretty much dead.
-
i have 2 mp 6 mids, iirc they are 8 ohms, pm me a offer
-
Look into sundown neo pros, awesome ev replacement and they actually have midbass unlike evs. I run them and live in the nj ny area
-
ill trade you a bnib asus p8p67 deluxe motherboard (which supports the 2nd gen core i3/5/7 processors which overclock to 4.5+Ghz, so you can upgrade
your whole machine) for a couple neo pro 10's
heres the link to the board
im not sure what your budget is and or if it will fit in your case, but if you decide to go with an ati card, you should look into the 6950 (some of them you can unlock via a dual bios feature that they have and overclock both the memory and the gpu to 6970 specs). Thats a pretty nice card but its a bit long and its in the high 180s on ebay.
i my self love ati cards and have a 6990 my self, best card ive ever had. take a look at my build log (that i never finished posting lol)
-
-
Specs are pretty nice, the one thing that get to meis most us carriers are not going to include the quad core samsung processor. They will instead use a dual core snapdragon iirc. Also the launch date, hopefully its not like the gs2
-
Whats the eta on the amps arriving to the us?
-
Hey guys, my friend has 2 dc xl m1 12's reconed by psi with an upgraded vc to increase power handling.
He was telling me that he was going to sell them because the box requirements were too big. He got a design
From someone on caco and the guy said he should get a 4.5cf (34"wx14"hx27"d). When i read on the dc site, they recommend
1.5cf for each 12. He is going to be pushing a 5k on it, but he needs to have the smallest box possible.
What are some good dimensions for a good box tuned to 30hz or 31hz, slot port in the middle and as small as possible, max dimensions are 34”w x 14”h
-
-
ill give u 25 shipped
-
currently about ~57 xp3000's left
-
Hey guys, well i have a stock headunit on my accord and a rockford fosgate 360.2. I have the radio connected to the 360 via hi level inputs. Ive searched around but did not get a good detailed answer. How do you set the gians on the 360 and on my amp while using a dd1
-
How long should i put the load for, or how low should i let it drop? How many times should i do it? Any specific setting to put on the charger ? wat should it rest at when done?
SMD VM-1 LED Volt Meter! (its back!) Pics/short vid pg. 19 (new update pg 35)
in D'Amore Engineering - High Quality Car Audio Installation Tools & Accessories
Posted · Edited by ALAMO695
What ever happened to this housing? i would really like this housing