ALAMO695

What ever happened to this housing? i would really like this housing

Looks like something is happening lol

Name-rich zip 07055 1 dc xl m2 12"

Good enough for A 5k and 1500w in mids and highs? Hoping to hold mid 13's. Get in here cody lol. Heres the electrical equipment 270 amp alt 2 runs of 1/0 pos 2 runs of 1/0 neg 1 xs d3400 up front 3 xs xp3000 in the trunk Dual inputs on the amp Enough to run at half ohm right?

to check for distortion in pro audio equipment, dj setups ect.

pm me, i have a couple parts we can talk about.

maybe one of the coils started going bad? since he is clipping a lot because of the gain settings? op do you have a dmm?

http://www.amazon.com/PAC-Remote-Amplifier-Level-Controller/dp/B0002J226O

X2

is a 270amp alt, 300ah worth of batteries, 3 runs of pos and 3 runs of neg cca 1/0gauge enough for a dc 5k at .5 Ohm (expecting minimal rise) and a sundown sax 200.4? keeping a steady voltage of mid to low 13s while at full tilt? alt- mechman 270amp front batt- xs d5100 rear batts- 2 xs xp3000 wire- xs xp flex and shok reference 1/0 sub amp- dc 5k w. dual imputs on all the imputs subs- 2 dc xl m2 12" mids and highs- 6 sundown neo pro 8"/ 4 neo pro 10"/ kickers ssmb8s/ selenium st200 amps- sundown 200.4 & small 2 chan for the tweeters

Run a one inch wire or bigger hose from someplace hidden in the front of the car (behind the grill or something) and route it to have it blow on the alt somewhere. You can also get creative and add a fan to the front of the hose (part where the air is forced into) and it will improove airflow

just eliminate the wetcell completely and run the 0g from the back batteries to the front terminal. You will then basically start your car from the rear battery bank.

the agm batts usually rest higher than wetcells, therefore if you connect the agm with the wetcells, the wetcell will think that the agm is some type of charge and bring down the voltage of the agm to where they will "even out".edit causing the agm (if it rest bellow 12.6v) to develop sulfation on the cells, making that part of the cell pretty much dead.

i have 2 mp 6 mids, iirc they are 8 ohms, pm me a offer

Look into sundown neo pros, awesome ev replacement and they actually have midbass unlike evs. I run them and live in the nj ny area

ill trade you a bnib asus p8p67 deluxe motherboard (which supports the 2nd gen core i3/5/7 processors which overclock to 4.5+Ghz, so you can upgrade your whole machine) for a couple neo pro 10's heres the link to the board im not sure what your budget is and or if it will fit in your case, but if you decide to go with an ati card, you should look into the 6950 (some of them you can unlock via a dual bios feature that they have and overclock both the memory and the gpu to 6970 specs). Thats a pretty nice card but its a bit long and its in the high 180s on ebay. i my self love ati cards and have a 6990 my self, best card ive ever had. take a look at my build log (that i never finished posting lol)

fail post

Specs are pretty nice, the one thing that get to meis most us carriers are not going to include the quad core samsung processor. They will instead use a dual core snapdragon iirc. Also the launch date, hopefully its not like the gs2

Whats the eta on the amps arriving to the us?

Hey guys, my friend has 2 dc xl m1 12's reconed by psi with an upgraded vc to increase power handling. He was telling me that he was going to sell them because the box requirements were too big. He got a design From someone on caco and the guy said he should get a 4.5cf (34"wx14"hx27"d). When i read on the dc site, they recommend 1.5cf for each 12. He is going to be pushing a 5k on it, but he needs to have the smallest box possible. What are some good dimensions for a good box tuned to 30hz or 31hz, slot port in the middle and as small as possible, max dimensions are 34”w x 14”h

Solddd

ill give u 25 shipped

currently about ~57 xp3000's left

Hey guys, well i have a stock headunit on my accord and a rockford fosgate 360.2. I have the radio connected to the 360 via hi level inputs. Ive searched around but did not get a good detailed answer. How do you set the gians on the 360 and on my amp while using a dd1

How long should i put the load for, or how low should i let it drop? How many times should i do it? Any specific setting to put on the charger ? wat should it rest at when done?