lotus

some parts of the insulation are a little burnt but it looks like the wire is perfectly fine

im doing the big 3 but my batts in the trunk so its a little harder to do in my cobalt. is it ok to use, used 0awg wire? my friend is selling his 0awg that he took out of his car that works perfectly

well thats just wat the voltage meter said that i plugged into my 12V plug. idk how accurate it is but everything is stock. and the only 0awg i have is batt to amp. and alt to batt is only 8awg

i have 2 american bass xd 12s on a american bass 100.1 (1500rms) and i checked my voltage at full blast and it maintained around 14.6 with a 1 sec drop every 20-30 sec to 14.2 but mostly stayed around 14.6v. should i still do Big 3? will i notice a difference?

well i just need enough to where my spoiler isnt shaking to the point its about to fall off

how much damplifer do i need to cover my whole trunk? or at least enough so my trunk wont rattle

yeah the speaker wire to my subs. aq2200 to 2 xfl 12s

what sites sell deadening and can i use 8awg inplace of speaker wire?

yeah i was planning on leaving the stock

because a 2nd one is another $300

no i have 2 american bass xd 12s on an 100.1 vfl amp at 1500rms and want to know if its worth to upgrade to hdc3 12s on the aq2200d...

what do you think the max output at 1ohm with a good electrical would be for the 100.1?

so upgrading from 2 12xds to 2 12 hdc3s is a waste of time?

both wired at 1ohm. yeah both 12v

i have an american bass 100.1 that puts out 1500rms and i want to get an aq2200d. how db increase will i see and how much noticable will it be to the ear?

thanks

I have a Cobalt lt coupe 2010. the alt is 105amps. im going to be running an AQ2200d with 2 AB XFL 12s. i already have 0awg from the stock battery in the trunk to the amp and ground. im planing on buying a 2nd battery either an XS power D1400 - D3100 . whichever helps out more since i cant upgrade my alt. and wiring 0awg from my alt to stock batt then to my 2nd batt. i want to keep my current alt but do the big 3. would my alt be able to handle 0 awg? and should i take out the OEM wiring? i currently have an AB 100.1 vfl (1500rms) and everything seems to work fine on full tilt but i just wanna be sure everything will be functional. i also have halos with 8000k hids if that counts towards strain on my alt

no...

What is the American Bass XFL 12 cutout diameter? and whats the total diameter with the face ring? and what is its displacement?

ok i measured my trunk and everything and found out that 33 will not fit nicely. so i went down to 32.5" width x 15"high x 25"deep and got 21" of port length for about 35.36hz with 13.7in of port area per foot. 4.41 net volume

what about 35hz with 4.5cu net, 4.5" port thats 21" long

okay so i get about 5.4cu, so for a tuning of 32hz i should just go 27 then

so if i want 32hz how will i get it exact? i have 2 12" XDs and useing 3/4" MDF

do u calculate the subs displacement also for tuning?

my box dimentions are 33width x 15high x 25long and my port is 4.5wide x 13.5high and i want it tuned to 32hz. what should the port length be?