Nivram

At the moment My wall is sealed up at the rear windows, I was thinking to seal it off at the b pillar which would in turn take a good 5+cubes out of my cab. Im pretty sure it would make me a bit louder due to less air space but im wondering would it change the peak of my cab? I want my set up to get low. i dont want to make these trim pieces and just end up peaking higher. Should i do it or no?

Yea i would like tho change the white to gray or something. im still undecided. But thanks!

I think it came out okay.

Its been way to hot outside... So I decided to do a Small project this weekend that i could do In my house with a/c

Dude .. Just wall it. . You will be happy. And it is possible to do cleanly so you will later be able to convert to stock. If you do decide to wall it. try something like 8-12 sa10's And stupid power!! at least 5k

You will need more power!

my windsheild is flexin hell yes!

33hz

subs mounted up \ bondo the port sorta kinda still needs work. sanding by hand suxxx...

Ive been slackin... either way i took it apart again and made a new port today. Also went shopping and picked up some 5/8 threaded rod for bracing. I have to mound everything then i have alot of glassing/ body work to do.. Then i hope itl boom. Man this is alot more work than i expected!!!

37hz

Il post pics and vids when i get off work. its pretty loud but i need a diffrent port tune. i need my low bass.

I finished it!! it is for sure louder but still not as low as i would like it to be i guess i need to play with the port some more..

Im trying not to F around this time around. Because last time i blew my baffle apart lol I decided it was then time to use some good wood and try it again. This will be the home of 4 sa 15's Okay enough of the chat. I just got home from work. so now its time to get to work.

check master cyl Brake pads Fluid Bleed them. Hole or cut brake lines torn caliper boot ???

Im going to try and finish the ports because they are not mounted just yett I didnt have any screws smaller than 3/4 so i wasnt able to get them screwed in I also need to figure out a way to brace it real good. It just sucx not having my boom boom. .... Day 2 without bass

Its been a work in progress for awhile... ................... A week went by and I was not feeling the port so i took it apart and rebuilt it today july 4th. either was got it closer to done!! the Rods are done. fun fun trying to round my edges smh.... fiberglass done I made the top and bottom pieces for the port finnalllyyy..

14 cubes At the moment. but if i tear it down and re build the specs are going to change.

if i build the wall outward to take up more cab space can i has a lower peak?

Okay cool!! i knew i was tuned somewhere in the 30's but the strange thing was when i did go get metered my car put up the best score @46hz i thought it was a bit strange because im tuned low. if i keep my center vertical port i would be able to do 260sq in max If i rebuild the wall and do a drivers side port. the world then becomes mine. hell i could have up to 500sq in of port.

okay say i re do the wall and built the port 250" would it help my lows? How much port area should i go with?

my set up does hurt a bit at 40-50hz but id rater have my lows hurt lol

How much port area would 4 sa 15's need ?

This is the box build. If i need to rebuild it to get my lows them thats what i will do. My box is 14 cubes the port is 132sq in and 13in long http://www.stevemeadedesigns.com/board/topic/135404-buick-century-wall-i-just-got-in-from-putting-in-work-5min-ago/