[Fosgate 15" T1 dual 4 ohm, smells....funny]

to make maters worse, i came inside to see what it would do off 80 watts of a surround sounds receiver, and blew my receiver up, today is not for me.

[Fosgate 15" T1 dual 4 ohm, smells....funny]

anyone wanna buy a sub?

[Fosgate 15" T1 dual 4 ohm, smells....funny]

i traded a 60$ amp, an SA-8, and 30 bucks, that mother fucker.

[Fosgate 15" T1 dual 4 ohm, smells....funny]

FUCK

[Fosgate 15" T1 dual 4 ohm, smells....funny]

nope what?

[Fosgate 15" T1 dual 4 ohm, smells....funny]

Ok, so i think im a retard, i just pushed up the cone, i saw the top half of the copper looked brand new, and the other half is like a grayish black, am i boned? and if one coil is blown, which is what it seems like, then which coil is which? how do i find out if the top of the coil is the connections on the right or left or the sub? can i run it off one coil and just cut the rms in half?

[Fosgate 15" T1 dual 4 ohm, smells....funny]

2.0 cubes, gain turned all the way down, bass boost off, air tight, its been 20 minutes since i did that and now i can hardly smell it, even if i put my nose right next to the motor, im very confused

[Fosgate 15" T1 dual 4 ohm, smells....funny]

Earlier today i traded my SA-8 v.1 D4 and some cash for a Rockford Fosgate 15" T1 dual 4 ohm, seemed to work fine when the guy did a demo, free air, off his amp, played for a minute fine, didnt smell anything, didnt hear anything funny, was wired at 2 ohms, so both coils were hooked up. Now i get home about an hour ago and did a a test in some random 15" box i found in my shed, for literally 30 sec to see how it sounded in a sealed box, crappy btw, and i took it out and it smells like old/ burnt/ electronics, it works fine, both coils are working, i tested them differently, and together, its got good excursion, doesnt bind, surrounds are good, i can see the coil is shiny copper, not burnt as far as i can see, so whats the problem? is it burning up slowly? is it about to burn up? can i only see one of the coils? was it burnt up, and fixed, so the smell is just there? what wrong with it?

thanks

[Bang for buck, 15" or 18" sub]

i think that i might just buy 2 of these, i dont wanna wait 3 more months to get something that could very well end up not impressing me, might as well try with some cheap ones

http://www.sonicelectronix.com/item_44511_Hifonics-ZRX15SQD4.html

[Bang for buck, 15" or 18" sub]

what about http://www.sonicelectronix.com/item_27322_RE-Audio-SX18D2.html

[Bang for buck, 15" or 18" sub]

ive never built any speaker / sub in my life, im not trying to make a 300$ mistake

[Bang for buck, 15" or 18" sub]

i know for almost a fact, im not going to be able to afford a decent 18" for quite some time, unless i get some crazy hook up

[Bang for buck, 15" or 18" sub]

I understand that, um for power i have no clue, only limits are no alternator, extra battery, and around 400 for an amp sometime down the road

[Bang for buck, 15" or 18" sub]

best bang for my buck, ive had 8's, 10's, and 12's, time to upgrade, ill have about 275 cash after i sell my SA-8, amp, other sub, and some other stuff

Thanks

also, i want to be able to hit lows hard, thats my reason for upgrading.

[Are my box specs going to work, Single SA-8 v.1 D4]

i can go these specs:

10x23x11.5

8.5x1x28

14.41 inches per cube foot

.59 cubes after displacment

35.72 Hz

Would that be a better option? cause i really would not like to go above 36 hz.

[Are my box specs going to work, Single SA-8 v.1 D4]

soooooo yeahh

[Are my box specs going to work, Single SA-8 v.1 D4]

I basically just want to know if this design will work for my sub, my only concern is the port area, i know 14in of port per cube foot is ok, but it only has 8.5 in of port area, so comment if its good, or bad. Thanks.

Sundown SA-8 D4 v.1

Wired at 2 ohms getting about 550 rms

10x23x12 box dimentions

8.5x1x30 port dimentions

34.29 Hz

.64 cubes after sub and port displacement

8.50 inch port area

13.28 inches of port area per foot

[should I trade or not...]

i would do it.

[Single SA-8 D4 box?]

its a 96 Toyota camry, but its my moms car so it wont be in there for more then 3 months, ill probably end up getting a civic or some other commuter car

Uhh i guess i did? haha i just joined today so when i saw both my posts on the recent posts thing i thought i had made them both on just the general forum, and i didn't want people to think that i was being pushy or spamming you know?

[Single SA-8 D4 box?]

oops i thought i posted in the sundown audio section my bad.

[Single SA-8 D4 box?]

Im confused as to what dimensions my box needs to be for the SA-8 i got in the mail, i know .6 cubes and around 35 Hz, but i don't know how to construct it, i am a noob, i do need to be walked through on certain things. thanks.