Jump to content

Clif

18+ All Access!
  • Posts

    759
  • Joined

  • Last visited

Posts posted by Clif

  1. The power wire is on dc voltage, while the speaker wire is on ac voltage. Ac voltage can use a smaller wires at same voltage of power wire

    Don't think that is true.

    Its all about the input voltage being around 13 so to get 2 kwatts you going to be 150 plus amps. Now on the output side of your amp it is ac and also a higher voltage around 63v(if running at 2 ohms) so you only have 31 amps of current going through your wire.

    Also you have a much longer distance from your bat to your amp then your amp to your sub. The wire has a resistance through it naturally so if you have a long run and need allot of current your going to have a big power lead.

    Cliff

  2. I take CVR's. They have a Sens. DB level of 89.1, as opposed to the RE sub(87.6). Doesn't that have to do with the "loudness" of a sub? Higher being louder when powered with the same wattage. If I'm wrong, somebody kick some knowledge. Also the CVR's r 500 RMS, as opposed to the 300 of the RE sub. Even if you don't fully power now, you can just buy stronger amp(s) later, instead of replacing both the subs/amp as you would IF you wanted to upgrade from the RE's.

    I herd somethen similar to this, like every 3 db it goes up it takes half the power to get the same output. I dont know if this is true but i think it is. someone please correct me?

  3. what would be the better bang for the buck?

    2 - 10" Type R $225 Shipped

    2 - 10" RE SE $290 Shipped

    Type r i think would be nice but the RE has a lil higher RMS handling, and also a little higher sensitivity level. Anyone got any feedback on these 2 subs? Plan on running both 2 ohm versions.

    Clif

×
×
  • Create New...