steve volz

i can get 2 used xfl 15s for 130 each

yeah but i can dream i want 2 15 facing forward sealed or 4 12s facing up

i want to make it so i can do a hair trick

still gotta wear helmates in MI but maby not for long

got my bike to establish credit to, wish i was smart and started as young as u. learn the bike practice riding wear there isnt alot of cars before you try riding in town people dont watch for bikes like they should and will cut you off. have fun and b safe

they are loud enough getting about 40rms each its probly like ray said they wont play below 100hz

its funny when people want more used then u can buy brand new

anybody know the space they need?

runin 3 10s now forward and i have the space on the front of the box but want to know how much space they need

im gonna run 3k my box now is 4cubes firing into the cabin, i think i can go up to 6 if i fire up

looking to get 2 xfl 12s or 15s but i cant find how much air space they need. how much airspace is everybody using and what are some numbers people r doing out of the trunk?

bass boost is all the way down

ch 1/2 are the mids im talking about

http://www.americanb.../product_id/123 here are the speakers yes they are in the stock locations

yes

i have a set of americanbass SQ65CB up front and a set of audiopipe APMB6900 in the back on the audiopipe 1504 amp. I also have 2 sets of usa link tweeters with built in crossovers on the same channels. I bought the americanbass for the mids but cant get them to sound good. any ideas?

wow i thought i seem some shitty boxes b4 but this tops it

stock alternater should be fine for 1 sub

the whistling stoped when i added ports i just need to tune the amp. what I thought was clipping was my amp rack hitting the back of the box

is there a difference in port area between a spl and a sound quality box? im going for quality

i used the wrong box calc when i built my box and didnt think port area mattered as much as it does

what if i made the 2 middle ports 4inch?

[/img]

should i change my ports?

i have the bass all the way down and the treble all the way up on the deck. I know u can use a dmm to set the gain by using the squareroot of the rms/ohms but i dont know the rms at 2.67ohms the amp is 1500 at 1ohm 950 at 2ohms 600 at 4ohms but i dont know about the rest of the settings and my ssf goes from off to 50hz would off be 0hz?