Beckett

the balance is on 0, i have 2 mid bass speakers in each front doors and the other drivers one is workin normally, jus the front of the 2 isnt :s

its wierd man, the driver speaker works on the passenger x over, but not on the driver x over:s

i got the RF T162s and i have installe dthem, but the right side is not working properly, like the tweeter is workin, but the midbass isn't...... so i figured it was a faulty x over sent it back and they tested it and said it was workin fine but sent me a brand new one anyway!, but it isn't. i test the mid speaker on the left side and it is working fine. i tried it back on the right side(same wirin etc as when it woked on left side!) and it still isn't working. i put a DMM on the speaker wires earlia and it had like 9 volts during music, but it isnt makin the speaker work!? does anybody know why this is doing it? there must be power gettin to the x over cus the tweeter is workin, but the mib bass output doesnt seem to be? is this possible?!?!? urgg i wanna jus get my speakers workinnn! cheers for any help people:)

good choice of car i absolutely love Vee Dubs! looking good there, this looks like a build i will have to follow Just wondering how do you secure the kick panel pods? HA i've wondered that for a long time how they are secured lol cheers xx

What about the RE's in the honda? (i haven't really seen anything more than the thread on the civic) Wow them seats do look slick bud ;)Is there a lot of clearence between them and the speakers in the door? xx

Ahh cheers Sir Steve LOL xx

yoo:). when i set my gains with a DVM i set the volume to 3/4 = 26 ((out of 35 i think it is lol.....alpine) but yea any way the thing that has been bugging me what volume shud you generally put it on when listening to music? i put mine on 22, any more it can sound a bit distorted,(not horrid distortion jus a tinl bit less clear kinda) am i oright goin to 22. or should i set the gains at 5/8's? cheeeers:) xx

when i looked at the pic with the mesh it made me go ' WOW' lol, looks really good steve!

ye mon:) posted it there aswell xx

hahah thats shits funny as!LOL gotta be on tomoro at lunch at work

what is the 1st song beeing played?? i love it want it in my car LOL cheers xx

its fuckin good man! plenty of :hairtrick:

yo, i had the privilage to sit in both these cars was the second time i heard them both so i thort i would film it;) i loved it, especially the goif:D comments

lol.. i don't care it was my 1st car:) haha. ............................ . . . . . ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. . . .. the reason i made a new box is so i can just take the woofer out of my current car n put it straight into the polo. i planning to get everything in the polo ready for just the speakers HU battery and jus the last little bits of crimping/wiring etc. plus the boot is a little bit different to my current car because it's a bit thinner so i jus wanted to move the sub in the new box as far away from the port as possible:) in the current car it is in the centre of the port and end of box. plus my friend at work built the current box for me, i jus wanted to actually make the whole thing myself so i can say i built it its tuned to 33Hz.. exactly the same dimensions as before:) i want to get a bigger and more powerful sub and amp in a few years when i can easily afford it etc xx

well here is the progress of my new sub box for the polo well here is the outside walls of the box..... i have just coated the whole inside in this epoxy resin to seal it and try and make it a bit more solid inside. here is the port, done the same thing, coated it in resin both sides.. then i 45'd the corners that will be in the port with the same epoxy resin, i this screwed and glued the port into the box... using some epoxy glue to seal all the joints etc. then i cut some batons in half and screwed the biggest one onto the port and glued behind it and in the joints. this is basically what the inside of my box looks like comments:) Beckett x

yeap @800rms pretty loud for the size i've been told

Here is the beautie she is a real rare car over here in Britain:) what i plan on doing is fibre glassing the doors to house the RF speakers, i shall be building a new sub box so i can place the sub as far as possible on the opposite side to the port because the boot is a bit thinner than my car i have it in now. and jus generally making it a real neat job by covering the battery and everything else in the boot with mdf so all that is visable is the top of the sub box and i will make something that will cover everything up when i leave the car in public so you can't see the stuff in the boot wanna know anything just ask.... shall be fibre glassing 4 rockford fosgate 2-way component speakers and there crossovers to each door:) Here is what shall be going in the back of her... shouldn't look like that tho This is the start of what i am doing, jus cutting some 15mm MDF to have a solid floor to screw everything down to.....there shall be tonnes of sound deadening everywhere in the boot and i may well glue another layer of MDF jus to make the floor stronger and more solid:) comments i will update as i do more to her:) Beckett xx

ohh Steve sir, this is my 1st post in this huge thread, i have been looking for a long time and i am blown away with your skills! you really have inspired me a lot to do a real neat and professional job of my second car:) today i went to my 1st car audio demo and some of the systems there was pretty good i only have a type-r poundin at 800rms, and i sat in a few cars with 10,000 rms and holy shit did they pound! ha so i can't imagine how loud your Tahoe is or how loud and clear chickens escalade is !!! keep it up sir:) xx

:S lol i'm pretty useless at this so that link is like this; i personally got the impression that in that link you have two wall's like a L shape port? sorry but could you explain it to me a lil bit please man? cheers.

sorry but isn't that a 'L' shape port from that link? x

i would like to know how to do tese square ports...(the kind steve made on his civic box..... any help on that would be great x

Hi there, I want to start building boxes for friends etc, but i am not sure how to calculate how big the port etc should be for each frequency. i would love someone to talk to me and teach me how to calculate it. any help would be awesome... cheers Beckett:) xx

Okay thanks sir. PM me when you find out please.....

how much would postage cost to the UK for 1 set of component speakers? BTW are they 6.5's? cheers.

what makes you say that sir?