2007g6

anyone? how accurate is that EBP statement i found?

so after doing some more thinking how true is this? The general rule of thumb is an EBP of 50 or less = a driver that is best used in a sealed enclosure. An EBP of 50 – 90 gives you flexible enclosure type options. An EBP of 90 or higher is best used in a ported enclosure. This sub has EBP of 44. Should i stick it in a sealed box? Also the dimensions i used earlier were max i cant go any larger in fact i might have to decrease the depth by inch or 2.

each sub displaces .15ft^3. Double that for 2 subs and thats where i got my .3 for sub displacement. So i assume my calculations would still be right then?

if that number fits in that range im golden then? ive never designed a box before just been doing some researching.

Sub Specs 12" Fs: 30.75 Qms: 6.759 Vas: 67.7 sd (m2): 0.0504 Qes: .692 Qts: 0.545 SPL: 87.2 1w-1m rms: 500 Each sub will be getting 450w rms. According to manaul for manufacture, ideal box is 3.5ft^3 so i got that covered. One thing im not sure of is port area. Do i have enough of it? To Much? All in all would this box work well? Thanks