[RE SXX 12 bottoming out?]

I actually haven't tried the switching woofers idea yet... I need to finish my coffee and quit being lazy and go try it out.. lol. But I will run down to the garage real quick and try it out. I talked to my buddy that's a dealer and he said I will probably need to swap the 1000 for a 1200. but the thing is, I can buy 2 of the aq1200d for less than 1 ks1200. So I might just sell both arc amps and buy the aq's. But I will keep you updated with the woofer swap.

[RE SXX 12 bottoming out?]

ya it's shared airspace. So you think the problem is the two different amps? In that case, i don't know what to do. Arc actually kind of screwed me by giving me the new model... now I have to buy another to match. -___-

[arc audio ks1200.1 vs aq1200d]

ok, let me redo this... sorry I didn't know that.

[arc audio ks1200.1 vs aq1200d]

I am currently running the arc audio amplifiers and I was wandering what the spl difference would be between the aq's and the arc's. I'm sure the arc will have significantly better sq but for right now, I'm trying to go with spl. I'm running them on (2) 12" re sxx. I'm just trying to find the loudest spl amp for the money, and from what I've heard, you can't really beet the audioque for the money. Thanks!

[RE SXX 12 bottoming out?]

Ok, I will definitely try switching them out. I will go down to the garage and do that real quick. But also, does anyone know if I can bridge the ks1200 and the 1000? They both put out 1000rms at one ohm... And I would be bridging them to one ohm. It's just the ks1200 does 1200 watts at 2 ohms which is what they're currently running.

[RE SXX 12 bottoming out?]

What's up guys? This is my first post but I've always been a big fan of this forum... But, I've got a problem. I just got my system installed in my new car. I have 2 re audio sxx powered off of an arc audio ks1200.1 and an arc audio ks1000.1. ( had 2 ks 1000.1's but when there was a problem recently they sent me a new ks1200 instead.) Anyway, one of the subs works perfect, but the other bottoms out on every low note. The amp settings on that sub are turned down to where it hardly even moves with high bass. But when it hits the low note it still bottoms out. Also it seems like the sub is kind of pulling in instead of pushing out. And yes everything is wired correctly and the phase on the amp is correct as well. I am stumped.. also if I'm looking for more spl, would 2 aq1200d's be louder than the arc's? I could sell the arc's used for well over the amount of 2 new aq1200d's. I'm just going for spl in this build. And the subs are in a 4 cu ft ported box tuned right around 30 hz in the hatch of a 350z. Thanks for the help!