-
Posts
331 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by khinds94
-
-
a shifted motor will not cause a coil to read incorrectly holy fuck where do people get there information.......your tinsel leads should be sewn down to the spider underneath the cone and soldered to the terminals
My bad I meant if the coil isn't centered, not shifted motor.
-
That is assuming your DMM works properly
-
The tinsels connect to the coil. It could be one of three things. Either the tinsel is disconnected from the coil, the coil is toast from overpower or clipping, or the motor is shifted and only reading one coil. Since you said it's dual 2 and neither coils read correctly then it's prbably because of clipping.
-
*analyzes data*
Shouldn't it be EBP, not EPB?
-
-
Yes it does most likely, what amp are you running
-
it need 1.5 cubic feet after ALL displacements including port
-
Depends on the response you want..
-
I did 2.7 cubes for an x12 rev 2 with 15 sq inches of port tuned to 27...
Works magic
-
How the hell are we suppose to tell you anything if we don't know the sub.
-
used classifieds tbh
-
Holy hell... Tuned in
- 1
-
Well what else are we gunna compare it to....
fuck....
-
Find out what the motor and basket is worth and that should be an accurate representation. Idk maybe like 75 bucks
-
Ho alt preferably 200+ amp. Biggest agm you can fit up front and 2 G31s in the back.
-
Good stuff... kinda ashame it's only offered to team members though.
-
-
-
Does 2k watts a sub make them move enough? I just hate showing woofers to people and they critizize it by saying oh man they are barely moving you need more power.I also like watching them move a lot. I just want the full potential of the subwoofer because I never spent so much on one sub. I was thinking putting it in the recommended enclosure 4.25 cubes with 68 sq inches of port tuned to 32.
i run my 2 zv4 15s on a saz3500dIf i got the zv4 15 would it move enough on 2000 watts? i would just like to see the full potential on the new sub. I am not going to upgrade in a while until i get a new vehicle. So i want to make this purchase right. Im maybe thinking a second sub and second 2k amp in the future for 4k watts in an suv.
It will move...
Trust me lol
I got a zv4 12 on 2k.
Remember it's rated at 1750... it just can take more
-
Damn. So how are the capacitors for demoing rather than burps? Charge right back up like the batteries did or do you have to wait in between long demos?
-
That basket puts the teams up to almost 125 lbs... lmfao
Good looking to say the least though.
-
Yah impedance rise and voltage drop are major issues in most of our setups. Last test I ran a saz-2000d @ 1 ohm and only clamped 850w @ 12.2v .
How big is your box? I'm running the same amp @ 1. Only dropping to 13.
-
So what I'm seeing is with an sa 18. You can throw 10 times the rated power and gain nearly 9 db?
Must be a nice box.
-
Jacob did a clamp test on the saz line. The 3500 is there for sure. I think the thread is on another site.
Sundown X-10 v.2 D2 Sub Help! (It took a shit on me)
in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
Posted
But... I received a brand new shd top and only one coil read when I put the top on the motor. I spent hours trying to center it and it wouldn't read. The tantric rep said it wasn't reading because I didn't have the coil centered and wasn't using self centering conical bolts to attach the basket to,the motor.