khinds94

My bad I meant if the coil isn't centered, not shifted motor. ............a coil not being centered will not cause it to read improperly unless he played it for soooooo long it rubbed through the former and into the coils shorting them out or rubbed the coil on the outside, but sense he mentions nothing about rubbing is this a likely scenario............. But... I received a brand new shd top and only one coil read when I put the top on the motor. I spent hours trying to center it and it wouldn't read. The tantric rep said it wasn't reading because I didn't have the coil centered and wasn't using self centering conical bolts to attach the basket to,the motor.

My bad I meant if the coil isn't centered, not shifted motor.

That is assuming your DMM works properly

The tinsels connect to the coil. It could be one of three things. Either the tinsel is disconnected from the coil, the coil is toast from overpower or clipping, or the motor is shifted and only reading one coil. Since you said it's dual 2 and neither coils read correctly then it's prbably because of clipping.

*analyzes data* Shouldn't it be EBP, not EPB?

Yes it does most likely, what amp are you running

it need 1.5 cubic feet after ALL displacements including port

Depends on the response you want..

I did 2.7 cubes for an x12 rev 2 with 15 sq inches of port tuned to 27... Works magic

How the hell are we suppose to tell you anything if we don't know the sub.

used classifieds tbh

Holy hell... Tuned in

Well what else are we gunna compare it to.... fuck....

Find out what the motor and basket is worth and that should be an accurate representation. Idk maybe like 75 bucks