nahinder

Just found the Cross over for the Tweeters: https://www.dropbox.com/s/gk5f81evpcq49nn/2012-05-12%2015.33.39.jpg So that shouldnt be the problem.. Just saw Steve's ISF plans Im planning on doing something similar, any tips ?

It was always like this

Just checked the Speakers Here are some pics: MIdBass https://www.dropbox.com/s/2i886u7x1h211xf/2012-05-10%2017.29.21.jpg Tweeter https://www.dropbox.com/s/kiws85dzxsniouy/2012-05-10%2017.29.47.jpg Wired like this https://www.dropbox.com/s/1qgx8x9f1appfix/2012-05-10%2017.30.10.jpg

Thats right but somehow the speakers cracks on low and hi volumes. And for the SUB its still wired in series so it's playing on 8 ohms right ?

How do i order a dd-1 from here.. Does Steve send them to europe ?

Haha ok i will turn those down... all the way ? Checked the internet and found the total capacity of the trunk which is 480 Liters metal plate behind the rear seat: https://www.dropbox....9h/Naamloos.png Ive already cut a hole on the red lines Planning on cutting on the green lines an screwing an MDF plate on it.. Good idea ? Trunk Dimensions (in CM) https://www.dropbox..../Dimensions.png

Ive enabled the HPF settings to 63Hz which slightly decreased the cracking. The speaker which came with the car, looks like an Composet but I think it misses the filter (Could this explain the cracking issue?) Brand is Caliber will check the models tomorrow, I wil also measure the trunk. Thnx Joe !

I think the speaker problem

Hi John I had first wired the sub parallel, then later changed it to series. (Will wire it back) The box is an Sealed box and is about 150Liters >see pictures So you recommend to go for the stock box ? The settings on the AMP >see picture There is no amp between the speakers the wires run directly to the speakers. (planning on installing an second amp for the speakers to get rid of this problem)

Hi Forum ! My Name is Naveen and im from the Netherlands. This is my first post so dont shoot me if im doing anything wrong. Equipment: HU: Pioneer 3200UB AMP: Kicker ZX1000.1 (Planning on upgrading to the Ground Zero Plutonium 2.3000) Sub: Kicker S15L7 4 Ohms 2006 version (Planning on adding 1 more) Car: 1980 BMW E23 728 Problem: First In the BMW the bass produced by the kicker isnt comming out of the trunk. Which is caused by the trunk is completely made out of steel. Second anyone has a some good tips of making a Slotport box for this sub. Build Plans. (Trunk Dimensions not available right now) Third No mather which speaker i wire up to the Hu they all start to crack half way up the volume (which isnt very loud) HU Broken ? Wire Problem ? Thanks in advance !