[Audio Technix Ford Focus Build by BeatnFocus]

they sound amazing and love the lows

[Audio Technix Ford Focus Build by BeatnFocus]

ok so a little update picture, its a beast with 2 18s in it . I will have spl numbers after the 15th

tada

[Audio Technix Ford Focus Build by BeatnFocus]

Thanks everyone, subs r supposted to be delivered within the next few hours,so watch for updates

[Audio Technix Ford Focus Build by BeatnFocus]

I Cut my Baffles out of double layered 3/4" Birch Ply

Glued them together with titebond 2 for 48hrs clamped and weighted down

Slid baffles into place roughly where needed

Baffles centered in rear and measured for equal spacing ,then secured

1/2" all thread used for bracing.

All that is left is the subs to be delivered and installed... wall is sealed forward

Deadening : All Deadener is Audio technix's 60 mil line of deadener

Side project : No explaining other than Focal 6.5s

Sorry for lack of pictures as this has been over a 6 month span and I was doing all work myself and did not always remember to grab my camera

[Audio Technix Ford Focus Build by BeatnFocus]

Ok , lets start with the basics

Vehicle :2002 Ford Focus SE

Subs : 2 Audio Technix 18" Subwoofers

Intent: Do a 150 or better at 35hz at the headrest .

Now for the Pics :

I did some initial measurements for the entire volume I could use without a complex box. After Wood displacement I had 22 cubic feet of internal volume .

After finding my measurements, i went into Google Sketchup to mock up some ideas.Until I had a final idea of what i wanted to do

So before I started building I needed some much needed upgraded wiring . ( 6 25 Foot Rolls of Audiopipe 0 Gauge CCA) 4 Runs 2 Positive, 2 Grounds

I fused my wires 12" from post

Now I had to get a Battery bank (xs D3400

Odessey PC2150's

My amps of choice : Mb Quarts ONX 1.1500

Ok time for some framing and build pics No explanations :