Marla

Is the wiring correct as in the diagram above? So each amp will see a 1.5ohm Load.....What if I strap both amps

These are the amps in question 2 off

Im in the process of wiring my 2 x DD 9912 Quads. Im using 2x Eathquake PHD 10000 amps (1 amp for each sub) The subs are 1.5ohm each. Is the below diagram correct and what load will each amp see

Okay so my box is 6.7cubic feet......can you please specify the actual dimensions of the port...

Yes I did ..Its an irregular box so i poured sand in to measure and I came out with 192 LITRES

Ok so ive recentky purchased 2 DD quads 1.5ohm coils. I drive a VW Mark 1 and ive built my enclosure the biggest I can to fit in trunk area. The internal litreage of the box when measured with sand is now at 192litres. I need this box tuned to 32hz...Any idea of slot port sizes please

Any ideas of how low these amplifiers can go strapped for a daily set up... Box will be tuned to 32Hz running off 2 Quads 1.5 coils