[Average Life?]

No that would be fine. Just put it on the AGM setting.

whats the average life of a xs battery?

[DD-1 with set up on a rockford 3sixty.3]

A member by the name of Cj18 i believe did just that very video.

Hang on... ill snoop around..

was you able to find that video

[XS D3100 Handle Broke...]

I have handled I dont know how many hundred D3100 with the handles and haven't had an issue myself, but I have heard of a few different people that said they have had issues.

my handle broke getting my battery out box in to car

[XS Power Battery Wattage Guide]

They just fixed it on the new site.

hey Nathan what batteries will i need for 06 dodge magnum 170 stock alt till i upgrade to 270 or better

i know the chart say D3400 to replace stock battery is that right,what would i need to power rockford 2500bdcp,1000-4ad,400-4 and some accer. i want to buy my battery for my amps first before i replace the stock battery and my system is going to be daily with alittle demo thanks

[clifford 590.2x viper 590.2]

any pro alarm installer on here

[clifford 590.2x viper 590.2]

hi i have a clifford 590.2x and i have to addons which is the dual zone motion sensor 508d and digital tilt sensor 507m how do i wire these two to my alarm thur the optinal mux port for additional sensors

i was told to hook the powers together then diode the other wires but am not sure how to do it the right way?

[Chameleon paint job question]

x2

it depends ur car how much paint u need. also u need some one that knows how to lay it. i got a chameleon paint job also

x2

[DD-1 with 3sixyty input needed]

thanks kickass i got it and you to kylar

[DD-1 with 3sixyty input needed]

You have to find where the headunit clips first (use a 0db tone for this), then you connect the 3sixty up and one channel at a time (also using a 0db tone) find where each rca output on the 3sixty clips at and adjust the rca gain on the 3sixty so it is not distorted (note: from what i found the clip lights on the 3sixty are very close to the dd1 so you may find that if you turn up the gain more the dd1 will show distortion however the 3sixty will not show clipping. Just set what the dd1 shows.) Then you will connect your amps up to the 3sixty and adjust the gains on the amps (i personally use -5db tones for my amps. 0 is too soft and -10 ive had problems with so -5 is good for me and most music that is out there today).

ok let me know if i got this right first i get the clip point on the radio,second i plug the front rca on the radio to the front input rca of the 3sixty?do i plug the front output of the 3sixty straight in to the DD-1 to ajust the clip knob on the 3sixty? using the odb test tone ? and will repeat these steps for the rear and sub inputs and outputs?

[DD-1 with 3sixyty input needed]

i was thinking of setting everything the same way you planed it out the only differnt thing i will do is after i find my clip point on radio, i will match it to the clip point on 3sixty input ? would that be rite guys ?

[DD-1 with 3sixyty input needed]

Oh, Ok,.. if you want just him to answer,...... then ill lay off,....... and hope you get what you need......

EDIT- i have a Oscope, and a dd1, WITH a 3sixty.2........ and have set up my junk both ways.... but,... its cool... good luck in your venture...

i dont care who answers it just need the right answer this 3sixy got me stock

[DD-1 with 3sixyty input needed]

typo i fix it lol

how would i set the 3sixty do i set it like to the settings in the 3sixty manaul?

[DD-1 with 3sixyty input needed]

i have 3 questions that need answwering :

1. to check distortion on a preamp rcas ouptut would i just plug the rca of the radio in to the dd-1?

2. after i find the clip point on my radio do i turn my volume up to that point to set 3sixty clip point or the DD-1 is needed and how do i use it to set clip point?

3. how would i set the gains on my amps with 3sixty inline of the amps?

[FS : Rockford Fosgat T2500-1BD Class D Amp --Great Condition--]

inbox me your number we can work something out i get it today