-
Posts
906 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Tim Lam
-
-
nope. keep those kickers at 2ohms. NOTHING LOWER.
-
funny enough my friend had a similar problem in his Civic.
we installed a new alpine and checked all the wiring and the electrical in the car about 3 times,
and with so much frustration, he took it to cartronics(i hate the place) and they found it was a TINY 10amp fuse in his car's fusebox.
in short, check your fuses.
-
if i do it like that will it not choke the port? and i will be using aero ports
i dont exactly know what you mean by choking? but i have had amazing results with where it is right now anyways.
Yes! aeroports ftw
-
thats literally perfect for those subs. a little under 3 cubes per sub with those dimensions.
im personally a Aeroport guy, so my set up is just a plain box(with internal bracing of course) with a 6" aeroport tuned to ~31Hz.
it sounds great.
i run both of mine in a single chamber(it saves space) and just have the port between the 2 subs.
aero's are also great because of how easy it is to tune them. just just a little plastic here or there.
slot ports, if you want to change the tuning, you have to take the box apart or build a new one.
that's my opinion
-
you don't want lead acid batteries, you want AGM, go with xs power, or kinetic, I got my HC1400 for 220 shipped new from sonic.
haha i got a Kinetik hc1400 for $180 off of amazon.
But OP, i would suggest a Kinetik HC1800! ordered mine off of amazon for $220 and i know from experience these things are a lightning bolt in a box!
-
well if it's blinking red, its not something you can fix.
have to send it in to get repaired or get a new one.
...unless you're good a fixing amps.
-
my friend powered his 2 L7's with a Memphis Mojo 4K.
and HOLY SHIT, my ears were about to pop.
Memphis mojo 4K. get it.
lol he said he wanted a cheap price.
OP, look into hifonics, audiopipe, and lanzar. They arent bad for the buck.
ah yes, you're right. sorry OP.
guess cheap is in the eye of the beholder.
and i have seen some very good things about the Hifonics Colossus!
-
my friend powered his 2 L7's with a Memphis Mojo 4K.
and HOLY SHIT, my ears were about to pop.
Memphis mojo 4K. get it.
-
well i know for a fact, that alpine LOVES sticking with the 2OHM stable amps
yes they do carry 1ohm amps, but generally 2ohms.
with that being said, we see again the most power at 2ohms.
im guessing since it's digital, the comp realizes it's less resistance,
and i'm guessing the 1000rms at 1ohm is a sort of digital safe mode?
idk really but i just know alpine likes 2ohms and they'er damn good amps.
-
i would just tape up the wires, remove the fuse like stated before(from the battery to the amp).
and completely remove the amp. the wiring is fine if its just there protected, but if your amp is just sliding around it would cause a lot of stress on the wires and possibly ruining your ground cable.
well that was the case for me one time anyways...
-
yeah, you're going to have to get a seperate power supply for it(obviously haha)
but there's a reason why home audio uses lower power for speakers.
plus a house is a much better listening environment, so 2500rms is a bit of overkill.
not to mention your electric bill after using that for a month, ouch...
-
I hear you...
When OP asks about a noose knot..... we wil send him your direction....
Its cool man.... I myself wouldnt take that responsibilty....... just me....
aw so you're saying if he fucks up, the blame could be on me?
-
LOVE the port btw, where did you get it? and get it colored?
-
if room is not a concern, i would just battery bank it.
since you already have the iraggi alt, i would add a second alt if you still got voltage drops after the battery bank.
just my $.02
-
thanks for all the help i was wondering if i could run the 4/0 from my alternator to my second battery thanks
thats some beefy ass wire lol.
umm idk why you would want to connect your alternator to your SECOND battery.
i would just hook up your second battery to your wet cell(under the hood).
and i see many people using 2/0 awg and having no problems.
but if you can find the gear for that 4/0(seeing as how you probably put a dent in your wallet getting it),
all the power to you man!
-
well space is an issue i suggest going with an Aeroport.
they sound amazing and i prefer the sound over a slot port.
aero's are also much easier to tune and can be changed easier than slots.
6" aeroport atleast
-
DONT SHOW the OP !!!... geezus... i would not take that on........
K,.. well, enjoy op...
why would i not do that? it's helpful
-
oh btw that amp is 1ohm stable. so i would hope those subs are 4ohm DVC so you can wire down to 1 ohm.
and it's the same concept
-
it will look something like this
just make sure that the amp is.5ohm stable.
-
to run to .5 ohms with TWO subs, you need them to be 2ohm DVC.
wire the subs in parallel(connect the positive to positive and neg to neg on a single sub, do the same on the other)
than wire the two subs in parallel again, pos from 1 sub to pos on other sub, and neg on 1 sub to other sub.
-
if you can fabricate some sort of bracket yourself or find somewhere to put it, that's not a bad price. 2 stock 160a alts would work good
Or you could get one big one that might outperform the 2 stocks....a lot more expensive option
true but the cost and efforts may even out, seeing as how he will need to get another serpentine belt to fit the length of the added alternator, a new bracket thats durable enough to hold the 2nd alternator and all the complicated stuff. 1 H/O alternator may be more expensive but as long as its a reliable brand, it might save a lot of trouble down the road too.
-
DC power, Mechman are good reliable brands.
and like many people said the alternator is not something to go cheap on.
it's like having surgery and asking for a replacement lung from a smoker.
just not a good idea.
-
i prefer the Kicker anl fuses, but i guess a fuse is a fuse. and i think 250amp fuses would suite you fine for your power draw.
-
Im now lost, but I'm interested in this thread, since I'm trying to get my electrical squared away. How do you figure out how much you really draw? How do you then figure out what you need? Just add up output of your alt plus Ah from your batteries?
well the equation for Watts is AmpsxVolts
so if you have a 3500watt system and your car idles at 14V, you'll need 250amps which comes from the alternator.
but you also have to figure in the draws from the stock electricals of the car itself.
the actual draw of the amp is something you have to take a multimeter to, these people on here are just guessing how efficient that amp is at .5 ohms
New Team Discussion Area!
in Team Discussion
Posted
Are there any teams in the Middle Tennessee area?