Hi there guy's i'm back again. As promissed here is the update for the new made door panels with my extra FNP component system.
First off all, the previous install is for over 6 years in ride now, for the upholstery i ran into some problems, it isn't available anymore, i had a small piece laying around some where, so that's the reason why its build in 2 pieces and not just one.
Enjoy the pic's, and please leave some comments... Thx...
What i did first is, to protect the exciting panel by damaging, i taped the area were the second panel is should come.
A trail fit to see if it's gonna work as planned in my head....
What i did next was, i taped the edge off to get the shape that i'm looking for. The reason why i choose this method is, that i don't want to fiberglass anything in my car anymore, it's messy, and it smells like hell.........
What i did next is, the inside of the panel i sprayed some ( i don't know what's the english word is) expendable foam. It follows the contours made by the tape, but it doesn't stick to it... And you get the shape that you want...
This is how it looks when the tape has removed. As you can see it's expand a bit to big, but i can cut it into shape, so no worry's...
Cut into shape...
Unfortunally i forgot to take pictures of the glassing. Before applying the fiberglass, i first gave a layer of kitty hair to get rid off all the holes left in the foam. Then applied 2 layers off fiberglass, and as you can see started sanding and the first layer off bondo is used...
The first fit to see if everything is matching up.... Not to bad i must say...
Time for some upholstery....
It was a hell off a job, but it worked out ok...
Looks very sexy......
And the finished product.... i'm diggin' it....
And off coarse, the opposite site....
That's my build off the second door panel, hope you like it....
Kind regards Edwin.