[WTB AMP 2k-3k cheap]

ok so could only order one this morning dont know how fund are gonna be but i think i may wait to order more next check i have less bills

but side not it will be here tomorrow on the free ship hellz ya. and if u run yours like that i can drop mine down to 0.7 ohm (should be 0.5 be thats what the meter reads)

and just put the crappy kenwood up till i get more btw you cant strap 3 amps right??

and ok these capcell things does that raise you to 16v if so is it safe and would it help or just more kinetik

Mine are wired at .5 ohm but it comes out to around .75 after box rise, I have seen it as high as .88. They are good up to 16v.

[WTB AMP 2k-3k cheap]

I have four of the APSM 1500 minis, two strapped per sub. They are doing rated and some. Running around .75 ohms per amp just fine. Clamped them at 72 volts 48 amps = 3456 watts each pair. So I would imagine if it was a 1 ohm load on each they would be damn close to the 3000 per pair.

sorry OP.. don't mean to try and steal or poke my way into this thread.. but how do you have these wired? one amp to each coil? is it safe to do that? because those are REALLY cheap for that power!

They are strapped, two amps working together for each sub. One is the master and all settings on that amp are followed by the three slaves. I put my temp probe on them today after bumping for a while and they ranged from 103 to 104 degrees which is not bad at all for 1.50 ohm load between the two strapped, which equates to .75 per amp.

[circle in subwoofer box]

o wow.. $25 is cheap! i thought those things were like $150 lol.. is it good tho? i like to buy things that i can handle some wear.. specially tools.. but for $25 doesnt seem like i can go wrong! lol

A 2 year warranty was $10 or something like that but I pass it up.

[circle in subwoofer box]

o wow.. i don't have a jig saw tho.. would a reciprocating saw like this work? http://www.dewalt.co...aws-dw311k.aspx

A sawzaw would be very difficult, there not made for accuracy, but to just rip stuff apart. I got that jigsaw with a lazer for like $25 at harbor frieght.

[circle in subwoofer box]

Jigsaw is not hard at all

[WTB AMP 2k-3k cheap]

does it sound good man thinking of doing the same less then 500 for 6k is amazing tho i gotta do two now then two later lol

Sounds awesome to my ears, for $488 and nearly 7000 watts in my case. There is obviously better quality out there but for the price I think they are one hell of a deal.

[WTB AMP 2k-3k cheap]

I have four of the APSM 1500 minis, two strapped per sub. They are doing rated and some. Running around .75 ohms per amp just fine. Clamped them at 72 volts 48 amps = 3456 watts each pair. So I would imagine if it was a 1 ohm load on each they would be damn close to the 3000 per pair.