Scott Hughes

Mine are wired at .5 ohm but it comes out to around .75 after box rise, I have seen it as high as .88. They are good up to 16v.

sorry OP.. don't mean to try and steal or poke my way into this thread.. but how do you have these wired? one amp to each coil? is it safe to do that? because those are REALLY cheap for that power! They are strapped, two amps working together for each sub. One is the master and all settings on that amp are followed by the three slaves. I put my temp probe on them today after bumping for a while and they ranged from 103 to 104 degrees which is not bad at all for 1.50 ohm load between the two strapped, which equates to .75 per amp.

A 2 year warranty was $10 or something like that but I pass it up.

A sawzaw would be very difficult, there not made for accuracy, but to just rip stuff apart. I got that jigsaw with a lazer for like $25 at harbor frieght.

Jigsaw is not hard at all

Sounds awesome to my ears, for $488 and nearly 7000 watts in my case. There is obviously better quality out there but for the price I think they are one hell of a deal.

I have four of the APSM 1500 minis, two strapped per sub. They are doing rated and some. Running around .75 ohms per amp just fine. Clamped them at 72 volts 48 amps = 3456 watts each pair. So I would imagine if it was a 1 ohm load on each they would be damn close to the 3000 per pair.