Kolbyab1294

I have a 2000 jeep Cherokee in about to put four 15s in thanks to members on this forum I've found out what I need to know about the box so it should be loud

I did research an think I got it I apreciate everyones help I'll message y'all when I post my build

Before I recently became a dealer I had two alpine type r 15s in a hatch back

Yes I have always paid to get someone else to build my box and the guy that does is having a divorce so he just plan don't have time

I might not seem like it but I'm an authorized re audio dealer my box builder quit and I am on my own personal vehicle :/. I'm 18 And xtx 5000.1 is 2500watt at 1 ohm so what's the wiring on the sub "ohm load"? I know alot about the subs mids highs amps just not enclosures

And two re audio xxx 18 require 16 cubes

Four 12 not deep enough I wanted two 18s someone told me four 15s was better with equal power

So you are saying throw out square port and do huge slot port ? And 3/4 mdf down The center all the way to the back of box as in separating the two set of subs ?

John 253a I know it's not to big but when I post my build can I mention your name with a great amount of special thanks

Aero ports sound terrible ... My personal opion I've allways heard a noise that I dislike I appreciate the help I'm sorry if I seem un grateful if I knew who y'all was I'd pay you for your time

Ok this was my plans 2" face 3/4 every wear else Two 2" braces top to bottom Two 2" braces side to side Two 2" braces front to back I need one in the port ? My original plan I had the box 22.5 deep But I gave second thought and wanted a big front So it would have been a little different but it wouldn't have changed internal Why couldn't I do 10*10*4.09 something like that my port length was and I can get the port length perfect all the way up to 12x24 peice of wood I have a laser marker at my work I keep getting told my port isn't good enough but no one has helped me in telling me why

I planned on bracing top to bottom left to right I did the calculator on my cousins computer and all seemed right I don't quite understand an no one gave me an answer If you have the air spac correct and your frequency is right isn't that what matters?

I'm not doing 1.5 inch thick wood I'm doing .75

So the bottom one is the only one possible ?

I'll be bracing to I did the calculator and got 33.9hz which I thought in the end your frequency is what matters the most ? I had perfect 16 cubes I don't quite understand what's going on I guess I really appreciate the help not trying to aggervate people but I always thought you can play with the port depth to get your frequency and box size for cubic feet for the enclosure

I was doing my port dead center so it don't matter about room on top 42" wide I definitely should have the space for 10" square in the middle ?

I designed the box on my own I'm just going to stick with old school drawing and math And I like square ports because alot of successful boxes have big square ports and I've had slot Lshape and tube before

Any one can help?

Any suggestions on port I want a square port but I'll do rectangle I I have too

I know I need 4 cubes for each sub which in terms is 16 cubes sorry

I have 4 of the re audio sx pro 15 I am about to build a box and I have a rough draft but wanted to see if any one with soft ware could send me a computer model Subs displace .18 ft cube Ask for 4 cubic ft at 34 hz I'm building a wall so deminsions are 42 wide 37 tall How ever deep Im using 3/4 mdf And some 2x2 braces With 9x9 square port Any help ?