[2 DC 5k, 4 DC Level 4's]

Yes it is kind of what you said, but it wasnt the slave RCA, I mean my status on here may be NOOB. I do appreciate that help thou. I just happened to come across the broken one. But tonight at IASCA show, without setting anything the car did a 153.1 sealed on the dash. So I think I am on the right track. I will post build log and updates later. Thanks

[2 DC 5k, 4 DC Level 4's]

Hey, So I was rewiring everyinthing in my car and in the process found an RCA to the subs that was split in half! I have hooked everything back up, but that seems like it would cause a problem like the one I was having with no output, because there was not input. Do you think I am correct in assuming this? Thanks!

[2 DC 5k, 4 DC Level 4's]

They are strapped, I wouldnt get out put if they werent, but its impedeance rise Rusty explained it to me. Thanks for all the help.

[2 DC 5k, 4 DC Level 4's]

ok

[2 DC 5k, 4 DC Level 4's]

That is correct, that it was strapped.

[2 DC 5k, 4 DC Level 4's]

100AC and 34.9 AMPs

Thanks for the help.

[2 DC 5k, 4 DC Level 4's]

Did you see my edit? From the numbers I wroted down last night I think my imp rise is 2.86 + 1.4 =4.26. But I need help on how to get it down. I have these Zinc bolts on the side of my box to change the ohm load do those create that much resistance?

[2 DC 5k, 4 DC Level 4's]

Are you asking for resting imp and imp rise. The resting imp is 1.4 and I dont know what the imp rise is. How do I figure that out? Ok I figured it out and you were right my IMP rise is 1.4+2.86 which is 4.26 and the amps only do 2300 watts at 2 ohms. I have these bolts on the side of my box so I can change the IMP would those cause that much resistance to make the rise that high.

[2 DC 5k, 4 DC Level 4's]

I have 2 DC 5k and 4 DC Level 4s. I am having a major deliema. It seems like my amps arent producing. I clamped it last night Voltage drop was at idle 14.55 dropped to 12.98 and AC out put was 349. That only 5000 for both amps. I have 4 kinetik 1800 batteries and a 250 Amp HO Alt. I have all 0 AWG, and I have 8 AWG ran to my speakers. I plan on adding more batteries, but I still thought I would be producing more power accross two amps than that. Any help would be greatly appreciated.