faralint

Hi all! What kind of port need to use for start? Two 8" flared port, two 10" flared port or four 6" flared port's. or may be just one 10" port? box i think about 5 cu/ft I have two dc xl's 15 and dc10k.

sorry for offtop. DC 7.5k has the clip indicator?

Thanks!

Thanks! Now i have 146-148 at 35 -45hz and 144 at 30! I know this sub's can more!)) But i don't know how in my car.... whar box and port spec do you have? That's still really good on your numbers. Are those numbers sealed or outlaw? My car would only do a 46.6 sealed up, but outlaw it really gained.pMy box was 6.2 cu. ft NET, and I used one 8" aero port tuned to 33.5 hz. Sounded really great. As Stealth mentioned, doubling your front baffle could help brace it as well. Birch ply definitely needs to be braced. You could also add 4 more dowels to each corner of your box; around the sub cutouts facing forward to brace the front and rear pieces. If you really want to increase dramatically, you may have to add another amp. Trunk cars are somewhat power hungry if you really want to see 50s...especially luxury cars. Thanks! Numbers are sealed at 35+ hz. Outlaw gained at low hz below 30 hz.

Today i wont double front and rear wall of the box.This help?

Thanks! Now i have 146-148 at 35 -45hz and 144 at 30! I know this sub's can more!)) But i don't know how in my car.... whar box and port spec do you have?

Who can help me with increase scores? Welcome to my build thanks anyway!

my build log http://www.stevemeadedesigns.com/board/topic/173832-audi-a6-trunk-build/#entry2554035

Thanks! i'm wait my sub's to start. But i have some photo. Carbon and New AR-15 Cone.

Thanks!

Hi! Are this box good for two 15. XL's m2 on AQ3500 at 0.5 ohm's load. ??? 7.2 cu. with 90 sq.in of port 18" length. car - audi a6 c5 1998 Trunk. Sub and port look to the front and sealed off.

Thanks. Total 6.1net and port 83sq.in will be ok (last img) or the first image will be better ?

Also i can fit box like this. For the 15's about 6.1 net air space and port 83,1

Thank you! I have one aq3500 on them (0.667 ohm load), will be enough power ? and which port for 4.5net? 80sq or 65sq will be better? And how about two 15" xl's (0.5 ohm load)? or three 12" will be better and louder in my car and this box spec?