remi_357

Unplugged from amp there is no noise Unplugged from headunit noise triples

ok another update if i unplug the rcas from the head unit the noise is way way worse, almost triple (wtf?) tried new rcas noise still present i put the ground loop isolator behind the head unit and the noise is ALMOST gone, any suggestions from here?

Yep thats the first thing I tried, no luck

also tryed taking a piece of scrap 8 gauge and went from the battery negative directly to the amp and noise still there

power wire goes down passenger size, rcas down driver side i don't have any subs or bass knob, the truck only has 9k miles on it so im doubting the alternator speaker wires go down the driver size with the rca and taps into factory wire behind radio deck is ground to the black wire that comes from the pac interface, if i disconnect the rca the noise goes away, also before i added the amp there was zero noise

hello everyone, im getting very frustrated with my engine noise. It is a very basic set up. Here is what im dealing with 2010 f-150 pioneer x910bt mb quart componets in front doors mb quart 5x7 in rear doors mb quart onx80.4 4 channel 4 gauge power wire along passenger size, 100 amp fuse. 4 gauge ground grounded to the back cab metel behind rear seats remote on passenger side scoshe rcas brand new from walmart along the drivers side, the rcas never come within 12" of power wire. here is what i have tried so far turned gains way down different ground locations 4 channel ground loop isolator pionner ground rca tricks the noise is very faint when you turn the volume all the way down. It never increase in volume, but it does change with engine rpms. when you turn the volume up you can no longer hear the noise. however it is a pain in the ass using the bluetooth phone or gps when the music is off. This is a almost brand new truck and i do not what ANY nosie in the system. Any suggestions?

hello everyone, i just bought a 2010 f-150. It has 4 6x8" 1 in each door. I replaced the factory headunit with a pioneer x910bt double din. It sounds horrible, the factory speakers have lots of distortion and sound very muddy. i really dont want to add a amp unless absoultly necessary. Does anyone have any suggestion on what to replace the factory speakers with? My budjet is about $250 for all new speakers. Am i better off with some coaxials or componets? Any help would be great, thanks

1995 caprice with the lt1 i belevie it is a cs144 with a square plug, got anything laying around?

1995 caprice with the lt1 i belevie it is a cs144 with a square plug, got anything laying around?

damn, no one?

I bought a pair of old triple stack btl 15s. I was told they were universal . They are dual 2 s and I'm wanting to recone to dual 1s. Is there any was to verify they are universal before I order my recones?

remi_357 topeka ks 66618 o-scope

where can i buy dc audio? i looked at there website and there are no dealers even remotly close to me.......

sold my 4 cvr 15's. got a 95 caprice and a audiopipe 3000d. I want the most annoying stupid loud bass i can get for about 650-700 for subs. I was thinking 2 fi ssd 18s......what do you guys think?

I forgot to point out that the box will be 4 cubic foot per chamber with 2 subs sharing each chamber .

Hacking the back seat is not a option. I already have the 4 subs and 2 cubic foot each is the max that will fit in the trunk. Porting them isn't possible because it will be such a small box. Does poly fill really work? I. could do 3 but I want the wow factor of 4 lol

The biggest possible box for my 4 15" cvrs is going to end up at 2 cubic foot sealed per sub. All 4 subs on a audiopipe 30001d. Will this sound ok? Will it be able to get low with such a small box? Thanks

I always have used ie, I downloaded FireFox to try it and still no luck

Long story short this website will no longer load on my pc (it used to work and I have not messed with any settings ). Just bought a brand new laptop and it will not load on it either. However it works just fine on my HTC hero with sprint. Any ideas?

i can make it 14 inches high, thats not a problem. how long would the port need to be?

anyone?

ok, got my box all built now need help with port length here is what i got across (left to right) 28" height 12" front to back 20" the port is going to set on the left side sub up port back. my port width is going to be 2.75 inches. How long should the port be? The sub is a kicker L5 15 and the amp is a directed d2400. Please help i wanna finish the box today if possible