-
Posts
269 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Reed Farrar
-
-
I ran a pair of sa12s and then 15s i loved both sets I just wish I still had them =[ will probably be my next build
Hey i just got two sa 15s and was wondering if you possibly had a cut sheat of your old setup. Its hard finding designs online so anything helps
-
I just ordered two sundown audio SA 15 d4 subs. I have a CT sounds 2500.1 that i plan on powering them with. I have a 2001 Oldsmobile alero 4 door, I took out my back seats and plan on puting a box back there since theres no room in the trunk. The amps are going in the trunk along with the battery. I have been doing research trying to find some box designs online but could only find 2 box designs that are slightly to big to fit. So if anybody could help me with a box design i would appreciate it alot. My max dimensions for my back seat are 26 height, 21 depth, 34 width . recommendations are 3-4 cubes 35hz. i would like the box to be on the smaller side but not to small maybe like 3.5 cubes to each sub or 3.2.
-
-
Enclosure Specifications:
Fb = 34.5 Hz
Vb = 1.1 ft^3
External Height = 13 in
External Width = 21.5 in
External Depth = 13 in
Port Width = 1 3/8 in
Cut Sheet List:
* All Dimensions in Inches.
* Wood Thickness is 3/4 for all Parts.
External Enclosure Parts:
Front = 19 3/8 x 11 1/2
Back = 21 1/2 x 11 1/2
Left & Right Sides:
Side 1 = 11 1/2 x 11 1/2
Side 2 = 12 1/4 x 11 1/2
Top & Bottom = 21 1/2 x 13
L Port Internal Assembly Parts:
Front to Back = 10 1/8 x 11 1/2
Extension = 15 1/2 x 11 1/2
Assembly guide (generic dimensions): -
I took a single e10 design and made a dual box for my old setup and it was a good sounding box. I figure your already set on building one or i would try to sell it but if you want that design i could prob find it somewhere
-
just curious but how underrated is this thing suppose to be?
-
my car idles like 600 700 so im guessing thats why. does anybody know what to do about this kinda situation? or is there nothing i can do?
-
I just got a 320 amp alt for my 2.4L Oldsmobile Alero and when im at idle it sits at the 12s but when i give it any gas they go up to 14.8 every time. If anybody can help me i would appreciate any advice. I have no subs or amps hooked up, I have 0 gauge CCA from the alt to the battery, 300 amp fuse, And ground from battery to mount on alt. Got a new belt also since the pulley is smaller on this alt.
-
to have bad ass bass i guess you always have to wait. been about 3 weeks for me and i wont be done till next year prob. sad face for sure loli am sooo sad. is been almost 1 month with no bass hopefully this week before i go to orlando ill have it playing
What a year? Naww I would get a kicker and just put that shit in the back until I get bass lol
i meant like january. ya i had my two e8v3s on a hifonics 1200 but i sold to get the ct sounds 2500.1 before the perorder ended.
-
i am sooo sad. is been almost 1 month with no bass hopefully this week before i go to orlando ill have it playing
to have bad ass bass i guess you always have to wait. been about 3 weeks for me and i wont be done till next year prob. sad face for sure lol
-
i am sooo sad. is been almost 1 month with no bass hopefully this week before i go to orlando ill have it playing
to have bad ass bass i guess you always have to wait. been about 3 weeks for me and i wont be done till next year prob. sad face for sure lol
-
9798. cant wait to get my 2500.1. excited to see the results on this amp
-
Simple. Bolt it in and wire it and giver shit.
My gas guzzling fire breathing f150 can only have a 250amp alt due to belt slip they said. So how he can have a 370amp on 2.4
LOLOL wutttWill his little motor spin over 370amp without belt slip? Most large trucks with v8s cant go bigger then 270amp
Belt wrap does alot. I run 1200A of alts On a TRUE (not a weekend "daily" driver) with no issues. Oviosly if i try to move my truck when alts are loaded down itll bearly move.
An engine will spin anything to an extent.. BUTTTT will the belt hold? Thats when belt wrap and a good belt come into play. I have one alt that slips if i dont have good belt wrap. Odly enough its the stock position alt. ( N8 ill send you some pics of how to fix that..) and when it starts to slip my voltage will drop hard.
do you think ill need a new belt or no?
-
Good news is your gonna have little to no voltage drop at all
hell ya dude. i only have about 1500 watts now with a xs power d3400 and my shit drops to 11s on alot of metal songs that dont even have that much bass. if i listen to any kinda rap i have to be on the highway for it not to go under 11s. but i dont put it through that much torture cause i pretty much only listen to metal.
-
Everyone forgets they were young once and whats its like when something you saved for for 5 months shows up not correct. Yiu let the emotions get the best of you and thats ok. It happens to us all. You just have to stop before your ginferd hit the keyboard lol.
lmfao so true man
-
Will his little motor spin over 370amp without belt slip? Most large trucks with v8s cant go bigger then 270amp
You should probably just stop that nonsense right now. I've got dual 300s on my truck. they spin with ease. And I still have enough giddyup to do anything a truck is supposed to do. and its just a ratty old 5.7
Will his little motor spin over 370amp without belt slip? Most large trucks with v8s cant go bigger then 270amp
LOLOL wuttt
I think I peed a little.
Reed,
Before getting upset and making a thread make sure you have contact with the company first. Remember mechman is not a huge outfit. While I don't know the total number of people employed they are not hundreds or thousands I dont think. They arent working a 24/7 with a customer service section dedicated to phone calls and emails. I don't get replies right away no one does. Mechman is here as a vendor and has been a mainstay here for years because they will and do have a great reputation. While you can't please everyone and you can see a few people in here who didnt have a good experience they will make it right. I'd say by giving you almost twice the alternator you ordered for they did alright in my book. You'll be set for your next couple of upgrades free of charge.
Will his little motor spin over 370amp without belt slip? Most large trucks with v8s cant go bigger then 270amp
You should probably just stop that nonsense right now. I've got dual 300s on my truck. they spin with ease. And I still have enough giddyup to do anything a truck is supposed to do. and its just a ratty old 5.7
Will his little motor spin over 370amp without belt slip? Most large trucks with v8s cant go bigger then 270amp
LOLOL wuttt
I think I peed a little.
Reed,
Before getting upset and making a thread make sure you have contact with the company first. Remember mechman is not a huge outfit. While I don't know the total number of people employed they are not hundreds or thousands I dont think. They arent working a 24/7 with a customer service section dedicated to phone calls and emails. I don't get replies right away no one does. Mechman is here as a vendor and has been a mainstay here for years because they will and do have a great reputation. While you can't please everyone and you can see a few people in here who didnt have a good experience they will make it right. I'd say by giving you almost twice the alternator you ordered for they did alright in my book. You'll be set for your next couple of upgrades free of charge.
ya man i hear ya. i appreciate you actually talking to me like a human being. i know i look like a douche now but at least i learned from this experience and i need to be more patient with companies. i know everybody on here probably just sees me as a spoiled little punk kid. but im not so whatever. im just glad mechman is going to fix it for me and upgrade also which is unbelievable cause you are right i wont have to worry about upgrading my electrical for a very long time.
-
I understand that you say you didn't know. But if I was mechman I would sent you back your original 170 amp alt after all the complaining you have done
i know man. i know im a bitch. i heard it a million times already from everyone else on this forum.
-
expect to pay shipping sometimes. It sucks but I haven't found many companies that will pay shipping on their fuck-ups
well if they would of told me they were upgrading i would of never even cared. but ya i do realize now i was a little impatient
-
Wow is all i have to say Im glad i don't have a business... and deal with ignorant kids like this
you dont even know what your talking about so talk shit some where else.
Bhaaaaahahahahahhahahahahahahaha i can read
your more immature then me. do you get a kick out of talking shit to " kids "? lol
-
Just my 2 cent if it's o.k . Mechman is a stand up guy. And SMD is not the place to mess with him. And he is taking care of the problem. My parent Never bought me one red cent of cAR audio. Mom said to me when I was a youngster if you want car audio get off you AZZ and get a job buy it your self hun. But we all make mistakes a time are two.
please tell me whenever i said she payed for anything? she brought it. simple as that. i have payed for every single thing in my car myself. so you can go talk shit some where else and get out my business.
-
I'm shocked you paid $40 to ship an alt. Are you in canada?
florida. thats why i was surprised also
-
Wow is all i have to say Im glad i don't have a business... and deal with ignorant kids like this
you dont even know what your talking about so talk shit some where else.
-
Will his little motor spin over 370amp without belt slip? Most large trucks with v8s cant go bigger then 270amp
Will his little motor spin over 370amp without belt slip? Most large trucks with v8s cant go bigger then 270amp
ya i was kinda thinking that. hmmmm i guess we will see
-
I just want to let everyone no that i never knew i was getting a 370 amp alt. if i knew that right from the start i wouldn't of never made this or said anything about shipping. I know it looks like im bashing but i really wasn't trying to. Im happy y'all are fixing it and im sorry for what seems to be a little misunderstanding and me being impatient. i would like to delete the whole thread but i don't know how. Sorry mechman i know yall are a good company now and i feel like a complete dick for making this.
- 3
E12
in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
Posted
I have a single box design for a e12 my brother built two and has them in his car now. Sounds real good for e series subs