mcnaught82

I wanted to try an active setup, and see how I like it, but if they sound great with there crossovers than I will go that route. Right now I have the JL Audio 3-way components and I am not happy with the sound quality of the components.

The gold series

How would I go about doing that?

If I do buy them, I will probably only buy the drivers and not the crossover and run the tweets to one amp and the mids to another amp.

What exactly do you mean by the metal tweets.

I never had any problems until the deck was replaced the 3rd time than I started getting the pulsating from the subs.

Steve where are you front shocks at?

When I have my volume turned to 0 i can hear the subs slightly thumping like its picking up interferance somewhere. and when I turn my system off, like 5 seconds later they do a thump. Could it be a problem behind my deck? When I first had the system installed I had no noise at all, and now I am on my 3rd deck, the first 2 kept messing up on me. Its an Eclipse CD8445 Deck. and My amps are a JL Audio 1000/1 and 450/4.

How good are there component sets?

Sorry to resurect an old post but what program was used to design that diagram?

What do you expect when you order off the internet. Afterwards I put a shit load of screws all over that box. Never came apart again.

Where are the 5 runs of 1/0 Gauge Negative grounded to? also, is each 1/0 Gauge positive connected to each alternator and 1 to the front battery?

Steve are you still running 4 strands of 1/0 Gauge from Front to back? I was wondering cause in that one pic I see all the alts wired together, but I dont see the wires running to the back.

How do you get there catalog? I went on there website and I cant find shit on the 07 catalog, they only have a pdf of the 06 catalog!

I had 3 12's in a sealed box a while back and had no problems. actually I did have 1 problem, one day I was bumpin it and it started to sound funny, so I turned the system up real loud went back to the trunk to look and I blew the bottom off of my box. the box was literally bouncing in the trunk. The idiots that built the box only used wood glue and no screws.

Its on steves new video, the video is called open sesamie. and when the bass hits it opens the door. whats the name of that song?

Was the rear axles narrowed to tuck the 24's?

Thanks

http://www.stevemeadedesigns.com/videos/tremendous12.wmv http://www.stevemeadedesigns.com/videos/tremendous11.wmv