matt14 Posted March 28, 2011 Report Share Posted March 28, 2011 Me and my boy just installed a pioneer flipout and a Hiphonics amp with some L7's. The customer diddnt want a 4 channel, so we decided to bypass the factory amp and have the deck power the doors. The wiring diagram we had did not work and was only able to get one door to work. Well,,, we did so and now the SRS, ABS, and another message saying ( speed reduced to 90 m.p.h. He also just told us that his aftermarket alarm ( viper but not sure which one ) is not working and the interior lights will not shut off. Anyone run into this as far as installers? I told the guy to reset the battery ( touch cables together ), see if he can find the alarm reset switch and try that. Also, was thinking that when the battery was disconnected, the factory settings through the car was reset and now the interior lights stay on for say 30sec instead of setting it to your liking. Just not to sure about the warning messages. Maybe cause the battery was drained very low and caused some codes? Quote 2006 GMC YukonPioneer HU SHCA ran throughout Crescendo BC3500 One 18 AA Mayhem in a 4th order ZED Levithian 6 channel Rainbow Dual 6.5 comps ran Activehttp://www.stevemeadedesigns.com/board/topic/155628-matt14s-yukon-mayhem-in-a-4th-ordernew-amps-and-bats/page-3 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.