99xtremedime Posted April 9, 2011 Report Share Posted April 9, 2011 Ordered up some Dayton 6.5" classic 8 ohm woofers and a set of 1 1/8" 6 ohm neo tweets yesterday. I just have a few questions about how I should go about wiring them. Option 1 would be to wire 2 of the 6.5's together and 2 of the tweets together and running them through a set of RF Power series crossovers (meaning 2 woofers and 2 tweets per crossover) which are rated at 4 ohms and my 2 loads would be at roughly 4 and 3 ohms. Option 2 is to run 'em active... which i have no experience with and would need a thorough explanation of how to do so... any help at all will be appreciated! **The amp is a RF P400.4 4 channel by the way. 73W x 4 @ 4ohms; 127 x 4 @ 2ohms** -2 AQ HDC3 15's-'Nendo 3KWP @ .5-7.75cuft @ 30hz-Alpine CDA-117-4 Cadence PA 8's -AQ 200.2-2 AQ Supertweeters-XS Power D3400-270a Mecman Alt -Knu Konceptz Wire Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.