kanes_disciple Posted May 18, 2011 Author Report Share Posted May 18, 2011 When I got off work today me and my buddy went to my local stereo shop and borrowed a pair of new RCA's. We pulled the head unit and hung the RCA's over the seats and plugged them into the amp. Noise was still there, so my buddy grabbed a small screwdriver and touched the outside of the RCA's plugged into the back of the head unit and then touched the ground screw and the noise was gone. So in the end it was the RCA's needed to be grounded, so the guy that did my install ruined my head unit! Thanks for all the ideas and info guys! Quote Kenwood Excelon KDX-693 Head Unit Kinetik HC600 Powerbass 6.75's in front doors Powerbass 6.75's in rear deck Powerbass 1000.1D Powerbass 400.4 2 SA-12 inch Sundown Audio Subs 0 gauge Power Wire and Big 3 Custom Amp Rack Code Alarm with remote start Stinger Digital Volt Meter My build log http://www.stevemeadedesigns.com/board/topic/51869-1996-chevy-blazer-build/ My youtube channel http://www.youtube.com/user/kanesdisciple Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.