Box for btl 18

[OldsBoomer]

Damn you just replied to power lol ninja'd but yea don't go smaller then 5.5 but 6 is better

[eric78702]

Damn you just replied to power lol ninja'd but yea don't go smaller then 5.5 but 6 is better

So with even 6 cubes that 18 would be happy?

[OldsBoomer]

Yes but its power hungry to get really moving which is part of why I suggest a bigger box...it'll also be flatter that way

[eric78702]

Yes but its power hungry to get really moving which is part of why I suggest a bigger box...it'll also be flatter that way

Any other suggestions for the power and space I have?

[OldsBoomer]

Not really just stick with what fi says and a good amount if air space I dno what those hatches look like so I can't tell you how to fire the port.. firing against the hatch with about 4-5inch from the port opening will help lower your tunning and that means you can tune slightly higher

[eric78702]

Not really just stick with what fi says and a good amount if air space I dno what those hatches look like so I can't tell you how to fire the port.. firing against the hatch with about 4-5inch from the port opening will help lower your tunning and that means you can tune slightly higher

How about bracing. How much of it would I need to do?

[OldsBoomer]

Double baffle and some all thread will do

[eric78702]

Double baffle and some all thread will do

I would like to keep the box at least 6.25ft^3 or more but I don't have enough space for that kind of space. Is there any other subs you can suggest I use?

[OldsBoomer]

I don't use anything but Fi/AA I was just saying what is ideal you can run it in 5.5 and it'll work just fine. It'll just be a little peskier.

[eric78702]

Peskier?