2 10's custom box

[kevehdur]

Hey SMD my name is Kevin, im from western washington. Im pretty new to car audio. few friends in my area helped me out with some components and a couple 10's in 1cuft sealed boxes that dont fit in my rig. not running a ton of power. mtx 4202 to 2 polk gxr10's. i think its rated 280@2ohm/14.4v subs are 185rms 365pk or so. ive mocked up dims and a scale model of what i have in mind. im too noob to figure out the volume because of the angles. im going to beast step 4 on my list and mock up a cardboard full scale and test fit tomorrow. im not too sure how i should port it. aero or slot. trying to aim for 35-40hz but i dunno if its possible. i ran the box thru rhino4 and have a 3d model with rough dim's if anyone can help. i plan to build with 5/8" material. the notches and angles are for the angle of my trans tunnel and wheel well. i think thats all i can think of atm. i will post the pictures of what i have done so far. any help is much apreciated. ill try to answer what questions i can. thanks all.