DodgerCannon Posted July 15, 2011 Report Share Posted July 15, 2011 Evening all, Been working on this on and off for a couple of days. The box is for a DC Level 4 15" D0.7, its going into a punto boot. Will be running a Hifonics 1608D so should see about 1k @ 1.4ohm. Box spec is 3.5cuft tuned to 33hz, firing against the tailgate. Jon and Scott thurlow will be finishing the install with trim panels ect. Started with the port Round over anyone Baffle - 36mm Zee box Now that's not good for air flowww is it!? Ahhh..... Flush cut ftw! Quote Link to comment Share on other sites More sharing options...
DodgerCannon Posted July 15, 2011 Author Report Share Posted July 15, 2011 Yeh boi! Tested fitted the lvl4.... tight like a tiger! It's like it was made to fit What you think? Peace out Quote Link to comment Share on other sites More sharing options...
ISO Posted July 15, 2011 Report Share Posted July 15, 2011 Pretty nice looking man How wide is your port? It looks a tad thin but should be just fine though. Quote Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character. Link to comment Share on other sites More sharing options...
DodgerCannon Posted July 15, 2011 Author Report Share Posted July 15, 2011 20" x 1.5" ..... 8.6sq" of port per cube small to you guys but I've had better results using small ports than huge ones. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.