zaxfire69 Posted October 24, 2007 Report Posted October 24, 2007 Anyone in here a tint specialist..Looking to tint windows this weekend and need to know if it is to cool to tint. Or does Temperature matter?? Quote
goinpro Posted October 24, 2007 Report Posted October 24, 2007 well I am no pro...but I have been "apprenticing" for the past 6 months... If it is cold, I would recommend using less soap in the solution you use and just not rolling the windows down for longer then normal so the tint has more time to dry. Let me know if you have any more questions I will do my best to answer them Quote 2005 Nissan Altima 2.5 S HU: AVIC-D2 Fronts: ARC Audio KAR KS6006 Components AA Poly Mids/ CDT CW-19 Tweets in kicks Front Amp: Profile AP400x2 Rear Fill: None Sub: DC LVL 4 (CF Dustcap) x2 (waiting for dustcaps) AMP: RF t10001bd x2 (1400-1500 @ 1 ohm) Wire: Welding Supply/Lighting Audio 1/0 Power/Ground Zero Noise 2.0zn RCA (x2) 260 Amp Iraggi Alternator
zaxfire69 Posted October 24, 2007 Author Report Posted October 24, 2007 I am mainly focused on my 2 rear side windows and my Rear window..The two front windows will likely stay tintless for awhile. Quote
goinpro Posted October 24, 2007 Report Posted October 24, 2007 have you ever done it before? Quote 2005 Nissan Altima 2.5 S HU: AVIC-D2 Fronts: ARC Audio KAR KS6006 Components AA Poly Mids/ CDT CW-19 Tweets in kicks Front Amp: Profile AP400x2 Rear Fill: None Sub: DC LVL 4 (CF Dustcap) x2 (waiting for dustcaps) AMP: RF t10001bd x2 (1400-1500 @ 1 ohm) Wire: Welding Supply/Lighting Audio 1/0 Power/Ground Zero Noise 2.0zn RCA (x2) 260 Amp Iraggi Alternator
zaxfire69 Posted October 24, 2007 Author Report Posted October 24, 2007 It has been many years ago..Last time I took it to a pro..But I am confident I can do it..I put it this way>. I will try it, If I fail..A pro will do it. Quote
goinpro Posted October 24, 2007 Report Posted October 24, 2007 haha ok...cause believe me its harder then it looks...The roll down windows are the hardest...but check out tintdude.com for alot of info as well Quote 2005 Nissan Altima 2.5 S HU: AVIC-D2 Fronts: ARC Audio KAR KS6006 Components AA Poly Mids/ CDT CW-19 Tweets in kicks Front Amp: Profile AP400x2 Rear Fill: None Sub: DC LVL 4 (CF Dustcap) x2 (waiting for dustcaps) AMP: RF t10001bd x2 (1400-1500 @ 1 ohm) Wire: Welding Supply/Lighting Audio 1/0 Power/Ground Zero Noise 2.0zn RCA (x2) 260 Amp Iraggi Alternator
zaxfire69 Posted October 24, 2007 Author Report Posted October 24, 2007 Yeah I am going to give it a go..I have a hair dryer..And squeege. Good exacto knife..Gona trace it out with wax paper first then cut the tint. Quote
goinpro Posted October 24, 2007 Report Posted October 24, 2007 good stuff well lets me know how it goes when you get done Quote 2005 Nissan Altima 2.5 S HU: AVIC-D2 Fronts: ARC Audio KAR KS6006 Components AA Poly Mids/ CDT CW-19 Tweets in kicks Front Amp: Profile AP400x2 Rear Fill: None Sub: DC LVL 4 (CF Dustcap) x2 (waiting for dustcaps) AMP: RF t10001bd x2 (1400-1500 @ 1 ohm) Wire: Welding Supply/Lighting Audio 1/0 Power/Ground Zero Noise 2.0zn RCA (x2) 260 Amp Iraggi Alternator
FieroGrande Posted October 24, 2007 Report Posted October 24, 2007 get before and after pics tooo.........oh and how dark are you going to tint it? Quote
Guest Nismofreak Posted October 24, 2007 Report Posted October 24, 2007 take your time and patcience is the key. I am getting better but time is needed to make it look nice...I have to redo 3 windows but the last time I did it, looked like a pro did it lol. Good luck and take your time. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.