JesseyMclame Posted November 17, 2011 Author Report Share Posted November 17, 2011 Okay. So port width is 14.5, width is 1.5. and length is 7.55 and that gives me a port tune of 35 hz. Is that right ? well like i said before, you need to look at port area and port area range. obviously, you want the port area number to be somewhere in between the two port area range figures given. Okay, so I just got the proper figures for a 35.6 hz tuning, and got the port area in the range I need. It's H14.5 by W3.2 by L23. Now what ? you sure you're going to be able to cut wood precisely to the tenth? just stick with half inch intervals. it will make your life so much easier. Right on, hey thank you by the way for helping me out. Next I just need to understand how to assemble it. Quote Current setup in my 96 Hoe Hu - Pioneer DEH-80prs. Amps - (4) Crossfire C5 1700D's, MTX Thunder 5604(mids), PPI Art 300.2 (tweets) Batts - 4 91ah rear batts, 50ah batt up front. Subs - 2 Crossfire XSv2 18's Alt - Singer 330A Front stage - Random JL & Eclipse mids, Eclipse tweets Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.