Build and Tune for 2-SA 15"

[Relent]

I'm currently working on a design for 2-15" SA's, I have an 8" sono, my '99 Hoe has roughly the same dimensions to work with and I have a choice of giving them 500w per or 1kw per. I'll probably go with 500w per until I completely decide on tuning freq.

I have been running 1 of them in it to see which directions work best, all with sub firing up:

Port to rear corner is loudest.

Port to rear seemed the worst SOUNDING

Port to the side was perhaps the quietest but also sounded the best as it seemed to fill the cabin smoother and more evenly.

17"H x 41"W x 30"D

2-8" ports 24" in length after .38 of displacement for woofers and .2 for bracing= 8.04ft^ net with 12.5 port area per ft.

Final result is 32.30hz

AND with these dimensions it gives you freedom to choose to fire your port to the rear or to the side.

Pay no attention to the fact that I sound like I'm talking to someone else, lol

I just copied it from a post I just made on another forum.

Either that or I just talk like that....

Any and all input is appreciated, even haters. I wear hats too

Would really like some more experienced designers/builders input as I'm not the best and haven't done many